Symantec™ Security Gateways Reference Guide - Sawmill

Log messagesInformational messages (100-199)151120 - Symantec Client VPN internal version 1Description: This message is part of the normal Symantec Client VPN startup procedure.120 - Symantec Client VPN must send a STARTUP command firstDescription: The Symantec Client VPN needs to send a STARTUP command first.120 - Symantec Enterprise Firewall management processes startedDescription: The security gateway proxies have started successfully.120 - Template ID does not fit in one longwordDescription: If this message appears, it is caused because of a configuration error or an incorrect file related to the statictunnel.120 - TerminatingDescription: Individual proxies are terminating normally (for example, as a result of operator action).120 - The encrypted password did not match the supplied user passwordDescription: The LDAP authentication has failed.120 - The license does not specify VPNDescription: An attempt is being made to use a VPN client, without a valid licence, on the security gateway. The userneeds to obtain a license for the VPN client.120 - The Scan Engine has been manually shut downDescription: The antivirus scan server engine has been shut down gracefully.120 - There are more tunnels for user, we download onlyDescription: Each user is allowed to create not more than 500 tunnels. If you exceed this number, then this messageappears.120 - Third-party intrusion detection system from host/port has authenticated and is issuing arequest to blacklist a hostDescription: The intrusion detection system from a host or port has found an invalid host, therefore, issues a request toblacklist the host.120 - Timed out, failed to send dataDescription: If this message is sent from the Notify daemon, it indicates that the daemon was unable to get a responsefrom the modem.