Symantec™ Security Gateways Reference Guide - Sawmill

Log messagesInformational messages (100-199)139120 - Error adding attributes to transform listDescription: This message indicates a software failure.120 - Error adding proposal to request list for protocol AHDescription: This message indicates a software failure.120 - Error adding proposal to request list for protocol ESPDescription: This message indicates a software failure.120 - Error adding proposal to request list for protocol IPCompDescription: This message indicates a software failure.120 - Error during creation of neg proposal listDescription: This message indicates an internal software error. Please contact Technical Support by phone or online athttp://www.symantec.com/techsupp/ to report this.120 - Error during creation of peer listDescription: This message indicates an internal software error. Please contact Technical Support by phone or online athttp://www.symantec.com/techsupp/ to report this.120 - Error during IPSec security association negotiation with peerDescription: There is an error in the Phase II negotiation. This is not a software error, but may be a configuration or anoperational error. The log message displays the error code, which is used by the administrator to identifyand correct the problem.120 - Error during ISAKMP security association negotiation with peerDescription: There is an error in the Phase I negotiation. This is not a software error but is a configuration or anoperational error. The log message displays the error code, which is used by the administrator to identifyand correct the problem.120 - Error while initiating protocol negotiationDescription: This message indicates an error in the negotiation process. This is usually due to a a configuration error.120 - Error while processing data received from peerDescription: There exists a problem in the interpretation of the negotiation message from the peer. This is aconfiguration problem.120 - Established IPsec security associationDescription: The Phase II negotiation, which determines the protocol security association for the tunnel, is established.120 - Established ISAKMP security associationDescription: The Phase 1 negotiation for your IKE tunnel is established. In Phase 1, the IKE application creates an IKEsecurity association with its peer to protect the Phase II negotiation.