Symantec™ Security Gateways Reference Guide - Sawmill

230 Log messagesError messages (400-499)401 - Allocation failed (cryptography)Description: This is an internal resource allocation issue. Try decreasing the load.401 - Allocation failed (statistics)Description: This is an internal resource allocation issue. Try decreasing the load.401 - Allocation failed (thread)Description: Failed to create a new thread for a new connection. This is an internal resource allocation issue. Trydecreasing the load.401 - Allocation failed (transparency)Description: This is an internal resource allocation issue. Try decreasing the load.401 - Argument is an inappropriate address for the fudge command, so line ignoredDescription: The argument is an inappropriate address for the fudge command, so the line is ignored.401 - Attempt to blacklist rempass-registered address. It is possible that an active denial-ofserviceattack is being carried out against the addressDescription: This message is self-explanatory.401 - Attempt to configure invalid addressDescription: The format of the address that is attempted to be configured is invalid.401 - Attempted to write data, but wrote lessDescription: This is an internal error.401 - Authentication failedDescription: The user attempted to connect to the server but failed to authenticate properly.401 - Bad blacklist ACK packetDescription: The Notify daemon received an invalid protocol while communicating with the blacklist daemon. If thiscondition persists, restart the blacklist daemon.401 - Bad blacklist packet type (not an ACK)Description: The Notify daemon received an invalid protocol while communicating with the blacklist daemon. If thiscondition persists, restart the blacklist daemon.401 - Bad filename providedDescription: For the remote log retrieval tool, the filename given is too long.