12.07.2015 Views

Symantec™ Security Gateways Reference Guide - Sawmill

Symantec™ Security Gateways Reference Guide - Sawmill

Symantec™ Security Gateways Reference Guide - Sawmill

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

144 Log messagesInformational messages (100-199)120 - Invalid Phase 2 (QuickMode) ID type, it must be ID_IPV4_ADDR or ID_IPV4_ADDR_SUBNETDescription: The peer tries to negotiate a tunnel for an ID type that is not supported, so the connection fails. The tunnelis only supported for a host, subnet or for a range of addresses.120 - Invalid SPIDescription: This message indicates an internal software error. Please contact Technical Support by phone or online athttp://www.symantec.com/techsupp/ to report this.120 - Invalid tunnel indexDescription: This message indicates an internal software error. Please contact Technical Support by phone or online athttp://www.symantec.com/techsupp/ to report this.120 - Invalid type in configuration mode payloadDescription: The Symantec Client VPN has failed to establish the negotiation.120 - ISAKMP peer recovery completed, thread exitingDescription: The ISAKMP peer recovery has been completed.120 - ISAKMP security association with peer expired, will renegotiateDescription: The Phase I negotiation has expired. The Symantec Client VPN needs to reestablish the connections. Thisis a normal operational procedure and does not indicate a problem.120 - Joining clusterDescription: This message is part of the normal startup procedure during a cluster operation.120 - Listening on portDescription: This message indicates that the proxies are fully functional. The port is identified from the resourceparameter.120 - Loading ISAKMP configuration filesDescription: To ensure the safe transmission of data between the VPN client and the security gateway, Symantec ClientVPN uses the standardized Internet <strong>Security</strong> Association and Key Management Protocol (ISAKMP). In thiscase, the ISAKMP configuration files are getting loaded.120 - Loading static IPSec tunnelsDescription: VPN tunnels support static configurations, where tunnel parameters have to be manually created at eachsecurity gateway. In this case, the system is loading static IPsec tunnels and the configuration informationhas to be entered manually.120 - Looking for ticketDescription: The HTTP daemon is searching for a ticket, while processing tickets for Out of Band Authentication(OOBA).

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!