Symantec™ Security Gateways Reference Guide - Sawmill

Log messagesWarning messages (300-399)181301 - Could not stop source routingDescription: (Microsoft Windows only) This message provides information on the status of the network check.301 - Creating thread as none are idle and queue still has stuff on it. Going to threads forconnectionsDescription: A service is reporting on the status of its thread. It is either creating or destroying threads based on thesystem load. The administrator should monitor the load.301 - Defender user started out as one name, but authenticated as anotherDescription: The first user name is the name the user started with and the second is the one the user used forauthentication.301 - Disabling shared memory supportDescription: This message indicates an internal software error. Please contact Technical Support by phone or online athttp://www.symantec.com/techsupp/ to report this.301 - Download is allowed only for Symantec Client VPN, so dropping messageDescription: When you are establishing connection to a Symantec security gateway, you need to provide the IP addressand the authentication method. When your connection is established, the VPN policy and tunnelinformation for the connection can automatically be downloaded only by the Symantec Client VPN.301 - Duplicate external serverDescription: This message indicates a problem in the DNS configuration files.301 - Eliminating csvr entryDescription: This is a debug message. When a process ceases to exist, the connection entry is removed from theconnection table.301 - Errors loading fileDescription: Unable to load the file.301 - ESP NULL must have an authentication algorithm definedDescription: Encapsulating security payload (ESP) is the most commonly used data integrity method, which providesdata integrity and data source authentication. Therefore, it should have an authentication algorithmdefined.301 - Excessive replays from NetprowlerDescription: Requests to blacklist a specific IP address from a remote intrusion detection device are being received at anexcessive rate. This could indicate a configuration error on the remote device.301 - Excessive replays from NetProwler, so ignoring NetProwler for specified minutesDescription: Requests to blacklist a specific IP address from a remote intrusion detection device are being received at anexcessive rate so the security gateway will ignore the remote device for the defined time period. This couldindicate a configuration error on the remote device.