Symantec™ Security Gateways Reference Guide - Sawmill

Log messagesWarning messages (300-399)203343 - Cannot get SRL password entry because no password for 'srl' userDescription: The security gateway found the user in the secure remote login (SRL) password file, but there is nopassword configured. All SRL users must have a password added through the SGMI.343 - Cannot get SRL password entry because no 'srl' user in passwd fileDescription: An unauthorized user failed to access secure remote login (SRL), which is a secure Telnet with specific userconfigurations.343 - Cannot get SRL password entry because password blank or not set for 'srl' userDescription: The user configurations exists in the secure remote login (SRL) password file, but the password is eitherblank or has not been set.343 - Cannot get terminal attributesDescription: While attempting to send an audio alert, the notify daemon was unable to set up the workstation correctly.The audio alert is not sent.343 - Cannot negotiate dynamic ISAKMP security associations, so using authenticationSHARED_KEY with main mode (only with aggressive)Description: This is normally caused because of a configuration error. Check the Gateway-to-Gateway tunnelconfiguration, and the configuration of the security gateway address and the phase ID.343 - Cannot play audio because the audio device is busy or not configuredDescription: (Microsoft Windows only) Unable to play audio because the audio device is busy or not configured.343 - Cannot resolve DNS nameDescription: The user has configured the security gateway using a DNS name for an IP address but this informationcould not be resolved.343 - Cannot shutdown security gateway from GUIDescription: The security gateway was unable to shut down from the user interface because of an irregularity orconnection problem.343 - Cannot start security gateway from GUIDescription: The security gateway was unable to start from the user interface because of an irregularity or connectionproblem.343 - Cannot stop security gateway from GUIDescription: The security gateway was unable to stop from the user interface because of an irregularity or systemproblem.343 - Cannot synchronize with modemDescription: The notify daemon was unable to synchronize with the modem. Pager notifications are not sent.