12.07.2015 Views

Symantec™ Security Gateways Reference Guide - Sawmill

Symantec™ Security Gateways Reference Guide - Sawmill

Symantec™ Security Gateways Reference Guide - Sawmill

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

258 Log messagesAlert messages (500-599)516 - CPU temperature is highDescription: The temperature of the CPU unit is higher than the satisfactory level.516 - CPU temperature is lowDescription: The temperature of the CPU unit is lower than the satisfactory level.523 - Incorrect remote management authenticator receivedDescription: An attempt for remote access has failed to authenticate correctly.523 - Incorrect remote management challenge received (possible replay attack)Description: An attempt for remote access has failed to authenticate correctly.523 - Resource allocation failure (could not allocate port)Description: The GDP proxy attempts to get a free port for connection and has failed.568 - Driver packet resources exhausted. Packets dropped. Possible attack or misconfigurationDescription: This can result from an attack against the security gateway or a high-volume security gateway just needsmore resources. End-user connectivity is impacted as some messages are being dropped. Check the indexfor ScaleFactor, and determine if increasing the number of buffers is warranted.Every 10 minutes, this message repeats if the condition still exists. The count is the number of times theincident occurs, is cumulative, and may be larger than the number of messages that appear in the log file.571 - Driver log messages at this level suppressedDescription: Due to increased volume, the driver log messages are no longer being logged until conditions improve.571 - Temporarily suppressing messages because the security gateway has reached log limits fordriver messages at this levelDescription: Due to increased volume, information log messages are no longer logged until conditions improve so thatlog services do not load the CPU.572 - The intrusion detection and prevention loadable module is not respondingDescription: The intrusion detection and prevention module, which analyzes packets and sends alerts to the Symantecdriver is not responding.For either gated or non-gated mode, the administrator can change the configuration settings so that analert level log message is generated and the security gateway is not shut down.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!