Symantec™ Security Gateways Reference Guide - Sawmill

152 Log messagesInformational messages (100-199)120 - To enforce Phase 1 ID to be included in peer certificate, set configuration variable‘isakmpd.enforce_id_in_cert=0’Description: To use the digital certificate authorization, you must configure the Symantec Client VPN to use thecertificate. To perform the configuration, you must have a profile, password, and the security gatewayPhase1 ID. In this case, the message provides details on how the Phase 1 ID is included in the peercertificate.120 - Unable to connect to port. Attempting retryDescription: If the communication issue persists for a long period, it indicates a problem.120 - Unable to create UDP socket for isakmpdDescription: This is a case of software failure. The software is unable to create a UDP socket for the ISAKMP daemon.120 - Unable to fit ID of bytes lengthDescription: This is a configuration problem. The Phase I ID exceeds the set length limit.120 - Unable to send data to peerDescription: Sending data to peer has failed. Check system resources, such as, memory and network connectivity topeer.120 - Unknown AH transform type for tunnelDescription: This message indicates an internal software error. Please contact Technical Support by phone or online athttp://www.symantec.com/techsupp/ to report this.120 - Unknown ESP transform type for tunnelDescription: This message indicates an internal software error. Please contact Technical Support by phone or online athttp://www.symantec.com/techsupp/ to report this.120 - Unknown ESP typeDescription: This message indicates an internal software error. Please contact Technical Support by phone or online athttp://www.symantec.com/techsupp/ to report this.120 - Unknown tunnel typeDescription: This message indicates an internal software error. Please contact Technical Support by phone or online athttp://www.symantec.com/techsupp/ to report this.120 - Unsupported AAAA queryDescription: The DNS daemon does not currently support AAAA queries (IPV6). The security gateway dropped thequery.120 - Unsupported configuration attribute typeDescription: The VPN server can force a client to have a certain network configuration setting. In this case, the softwaredoes not support one of the network configuration settings enforced by the VPN server, resulting in aconfiguration error.