Telemecanique Altivar 56 manual - Northern Industrial

ALTIVAR 56FAULTCAUTIONPOWERFAN & PUMPDRIVEALTIVAR 56FAULTCAUTIONPOWERFAN & PUMPDRIVEChapter 6 — Class 8839 ALTIVAR 56 Combination DevicesBulletin No. 50006-519-01BHandling Drive Controllers December 1996HANDLING DRIVECONTROLLERSDo not remove a drive controller from its packaging until it is at the finalinstallation site. The packaging protects the drive controller and prevents damageto its exterior. Handle the drive controller carefully to avoid damage to the internalcomponents, frame, or exterior. When handling a drive controller, balance itcarefully to keep it from tipping. After removing packaging materials, the drivecontrollers require some type of mechanical lifting. Handle drive controllers:• With a hoist, attaching a spreader bar to the two lifting holes on top of the drivecontroller back panel (see Figure 73).• In a horizontal position, with back of drive controller resting on a pallet.WARNINGHANDLING AND LIFTING HAZARDKeep area below any equipment being lifted clear of all personnel and property. Uselifting method shown in Figure 73.Failure to follow this instruction can result in death, serious injury, or equipmentdamage.To hoist the drive controller, attach a spreader bar to the lifting holes located on topof the drive controller back panel, as shown in Figure 73. Handle the drivecontroller carefully to avoid damage to the internal components, frame, or exterior.Place the drive controller in an upright position.45°MAX.YESSPREADER BARLIFTINGFORCENOLIFTINGFORCEFigure 73: Hoisting Class 8839 ALTIVAR 56 Combination DevicesPRELIMINARYINSPECTIONThe drive controller must be thoroughly inspected before storing or installing.Upon receipt:1. Remove the drive controller from its packaging and visually inspect exteriorfor shipping damage.2. Ensure that the reference number of the drive controller, which appears on thenameplate, agrees with the packaging slip and corresponding purchase order.3. If you find any shipping damage, notify the carrier and your salesrepresentative.4. If you plan to store the drive controller after receipt, replace it in originalpackaging material and observe storage temperature specifications on page 122.128 © 1996 Square D All Rights Reservedηττπ://νιχοντρολσ.χοm