CanOBD2&1 Scan Tool - Sears

CanOBD2&1 Scan Tool Controls
VIEWING DTCs IN THE CANOBD2&1 SCAN TOOL’S MEMORY
2. Press the ENTER/LD button.
� The “Select OBD System” screen
displays.
3. Use the and keys to highlight
and select your vehicle’s OBD system
(OBD1 or OBD2). Press the ENTER/LD
button to continue.
� Select “Back” if you wish to return to
the Main Menu.
4. If DTCs are present in the CanOBD2&1
Scan Tool’s memory, the first stored
DTC will display on the screen.
� If more than one DTC is present,
use the DTC SCROLL button to
scroll through the DTC’s.
5. For OBD2 systems only - Freeze
Frame Data (if available) will display
after DTC #1.
6. If no DTCs are in the CanOBD2&1 Scan
Tool’s memory, a “No DTC’s are
presently stored in the Code Readers
memory” message displays.
14 CanOBD2&1