CanOBD2&1 Scan Tool - Sears

Chrysler/Jeep OBD1 Systems
CODE RETRIEVAL PROCEDURE
� To retrieve DTCs from the vehicle selection currently in the
CanOBD2&1 Scan Tool’s memory:
- From the “Current Selection/
Select New Vehicle” screen,
highlight Current Selection and
press the ENTER/LD button.
�
- Proceed to step 5 to continue.
To retrieve DTCs from a new
vehicle:
- From the “Current Selection/
Select New Vehicle” screen,
highlight Select New Vehicle and
press the ENTER/LD button;
the “Select Vehicle Year” menu
displays.
- Highlight the desired year, then press the ENTER/LD
button. The “Current Selection/Select New Vehicle” screen
displays for your confirmation.
FCC - means 1994 Four Cylinder Control Module for
the 1994 Chrysler vehicles.
- If the year shown in the “Current Selection” field is correct,
highlight Current Selection and press the ENTER/LD
button. Proceed to step 5 to continue.
If the year shown is not correct, highlight Select New
Vehicle and press the ENTER/LD button to return
to the “Select Vehicle Year” menu to make your
corrections.
5. Prepare the vehicle to retrieve codes:
� For 1988-1995 Chrysler/Jeep vehicles: The CanOBD2&1
Scan Tool will automatically begin the code retrieval process.
Proceed to step 6 to continue.
� For 1984-1988 Chrysler vehicles ONLY: WITHOUT starting
the engine, turn ignition ON, OFF, ON, OFF and ON again within
5 seconds to activate the code retrieval process. Proceed to
step 6 to continue.
6. When the CanOBD2&1 Scan Tool is in
the process of retrieving codes, a “One
Moment Please...” message shows on
the CanOBD2&1 Scan Tool’s display.
CanOBD2&1 71