CanOBD2&1 Scan Tool - Sears

Engine
8th VIN
Digit**
Ford OBD1 Systems
TEST CONNECTORS
Fuel Systems
(Carburetor
Model) Application/Special Notes
1991-1994 (Cont)
3.0L V-6 U EFI, SEFI, SFI Aerostar, Ranger
4.0L V-6 X EFI, MFI Aerostar, Explorer, Ranger
4.9L I-6 Y, H EFI, MFI, SFI
5.0L V-8 N EFI, MFI, SFI
5.8L V-8 H, R EFI, MFI, SFI
7.3L V-8 M Diesel
7.3L V-8 K Turbo Diesel
7.5L V-8 G EFI, MFI
3.0L V-6 U SFI
Bronco, E and F Series
Trucks/Vans (8500 lb. GVW or
less only)
E and F Series Trucks/Vans
(Excludes 1994 diesel models)
1995
Aerostar (Excludes Explorer,
Ranger and Windstar)
4.0L V-6 X SFI
4.9L I-6 Y SFI E and F series Trucks and
Vans (Excludes Natural Gas
equipped vehicles)
5.0L V-8 N SFI Bronco, E and F series Trucks
5.8L V-8 H, R MFI and Vans
7.5L V-8 G MFI E-350; F-250-350 (Excludes
California ); F-Super Duty
(Excludes Diesel)
Computer
System
EEC-IV
EEC-IV
NOTES
* Carburetor Model. Carburetor model numbers are usually stamped on top of the carburetor,
or on a metal tab attached to the carburetor. Consult your vehicle’s repair manual for
proper identification.
**VIN Number. The VIN number(s) used in this column identify the vehicle’s engine type.
This number is the 8th digit of the VIN (Vehicle Identification Number). Consult your vehicle’s
repair manual for details.
Application Table Definitions. EFI = Electronic Fuel Injection; FBC = Feedback Carburetor;
MFI = Multiport Fuel Injection; OHC = Overhead Cam; SC = Super Charged; SEFI =
Sequential Electronic Fuel Injection; SFI = Sequential Fuel Injection
TEST CONNECTORS
Ford vehicles are equipped with
special test connectors that make
it possible to connect specialized
testing equipment that communicates
with the vehicle's onboard
computer. Ford's vehicle test
connectors are usually dark in
color (BLACK or GREY). Sometimes
they have a plastic cover
over them or are labeled EEC Test.
The connectors can be found in
the following general locations in
the engine compartment: EEC-IV TEST CONNECTOR
CanOBD2&1 77
6-PIN
SINGLE
PIN