Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Ford OBD1 Systems<br />
ADDITIONAL TESTS FOR EEC-IV SYSTEMS - WIGGLE TEST<br />
� If no faults are detected when performing<br />
the Wiggle Test, a "System<br />
Pass" message displays.<br />
� If a fault is detected when performing<br />
the Wiggle Test, a "Circuit<br />
Fault detected" message displays.<br />
If the Wiggle Test detects<br />
any problems, the related<br />
DTC will be stored by the<br />
computer in "Continuous<br />
Memory". To view any<br />
Wiggle Test DTC’s you<br />
must perform the KOEO<br />
Test. See page 79 for<br />
KOEO Test procedures.<br />
10. Follow the procedures in the vehicle's service repair manual to<br />
perform troubleshooting and repairs for Wiggle Test results.<br />
11. The Wiggle Test will stay active as long as desired. To quit the<br />
Wiggle Test, turn the ignition OFF and disconnect the CanOBD2&1<br />
<strong>Scan</strong> <strong>Tool</strong> from the vehicle.<br />
96 CanOBD2&1