eWON General Reference Guide - eWON wiki

Supported memory areas:
Modifier:
General Reference Guide IO Servers Configuration
(*) Important: To avoid loss of precision due to Integer to float conversion, choose the right storage DataType for your Tag.
See "DataType of Tags" on page 75
examples:
• Status register:
The STATUS Tag is a special Tag that returns information about the current state of communication for a given device. As for the other Tags, the
status Tag ValueName is composed of:
Status, Global Device Address
• You can define a status Tag for each PLC used.
• If you use the status address, the Tag must be configured as analog.
0
X Memory area
A Auxiliary area
C Counter area
CIO Core I/O area
D Data Memory area
E Extended Data Memory area
H Holding area
T Timer Area
W Work Area
Table 90: FINS IO server supported memory areas table
Symbol Modifier value range
Automatic
Tag type
W Word (default) 0 .. 65535 DWord
S signed Word -32768 .. 32767 Integer
D DWord 0 .. 4294967296 (*) DWord
L signed DWord -2147483648 .. 2147483647 (*) Integer
F Float +/- 3.4e38 Float
Table 91: FINS Modifiers
address point to
A5 the Word at address 5 in the Auxiliary Area (equivalent to AW5)
AS5 the Signed Word at address 5 in the Auxiliary Area
A2#5 the bit 5 from the Word at address 2 in the Auxiliary Area
E0:S3 the signed Word at address 3 from the Extended Data Memory 0
C5 the Counter at address 5
D4 the Data Memory at address 4
Table 92: FINS address examples
Communication not initialized. Status UNKNOWN.
If no Tag is polled on that device address, the communication status is unknown.
1 Communication OK.
2 Communication NOT OK.
Table 93: Tag Status meaning
RG-001-0-EN ver 1.14 eWON® - 02/05/2012 - ©eWON sa Page 118