eWON General Reference Guide - eWON wiki

General Reference Guide eWON Configuration
3.3.4.3.3 Publish IP address
When the eWON goes to the Internet (automatically or by CallBack) , it can receive a different IP address at each connection. It needs to inform
you of its new WAN address thanks to this publish IP function.
Figure 45: Publish IP address configuration page
You need to to check the Enabled AND select NO-IP as dynamic DNS to access parameters.
Otherwise, you will see the page like this:
Control Description
EMail destination address
Dynamic DNS Provider
Publish by EMail
This field allows you to define the destination address by
default that will receive the notification.
Publish by dynamic DNS
Choose your Dynamic DNS provider
among the list beside
A Dynamic DNS provider are services
that allows you to publish on the Internet
a domain name that matches the IP
address of your PC (fix or dynamic type).
Dynamic DNS Username Put here your Username.
Dynamic DNS password
Dynamic DNS Host name
Dynamic DNS Domain name
Debug connection
This field allows you to enter a valid password for the
Dynamic DNS server you want to use.
This field allows you to enter a valid host name for the
Dynamic DNS server that you want to use e.g. myewon.
This field allows you to enter a valid domain name for the
Dynamic DNS server you want to use e.g. no-ip.com.
In our example, your eWON will be accessible at
http://myewon.no-ip.com
Check it to record debug info about DynDns negociation in
the "Diagnostic->RealTimeLog" page.
RG-001-0-EN ver 1.14 eWON® - 02/05/2012 - ©eWON sa Page 56