eWON General Reference Guide - eWON wiki

3.3.1.2 Alarms (globals parameters)
General Reference Guide eWON Configuration
Figure 11: eWON system general setup – Alarms
Control Description
Action retrig interval
Retry action
Action retry interval
After having encoded your parameters, go to the bottom of the page to .
3.3.1.3 Date & time
The alarm action (eMail, SMS, PutFTP, trap SNMP) is retriggered permanently after specified interval as long as
the alarm state is ALM (the retrig is stopped by an Acknowledge or a ReturnToNormal).
The default value for this parameter is 86400 seconds (1 day).
The value 0 disable the retriggering feature.
This parameter defines the number of times the action will be retried in case of errors. The value of this number
must be greater than 1.
This parameter defines the interval (in seconds) between two retry attempts if an error occurs. The value for this
parameter must be greater than 10.
Table 6: global alarms controls
Figure 12: eWON system Date & time setup
The eWON’s real time clock can be updated manually with this dialog window. Fill in the edit box with date and time and click on .
An event will be added to the event log indicating the time update and the time offset between old and new time.
Important: Updating the time may result in duplicate points stored in non-chronological order in the eWON files (alarms,
events and historical).
RG-001-0-EN ver 1.14 eWON® - 02/05/2012 - ©eWON sa Page 14