eWON General Reference Guide - eWON wiki
eWON General Reference Guide - eWON wiki
eWON General Reference Guide - eWON wiki
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>General</strong> <strong>Reference</strong> <strong>Guide</strong> <strong>eWON</strong> Configuration<br />
Primary & secondary servers<br />
The following parameters are the same for both servers. Two different servers can be set up. This ensures that the <strong>eWON</strong> can find a way out for<br />
PPP link if a server is down. At the startup of a connection, the primary server is always dialed first. If the connection cannot be established, the<br />
<strong>eWON</strong> tries the second server. If it fails, then it toggles back to the primary server. This is done until the dial-out timeout is reached.<br />
Figure 35: Modem Outgoing Server setup page<br />
Control Description<br />
Connection type<br />
Server phone number<br />
only present in GSM/GPRS modems.<br />
Select the dialUp type: Remote acces connection or GPRS.<br />
With GPRS, the Server phone number will be hidden (unused).<br />
The complete phone number of the server. A coma (,) can be used to insert a pause (can be<br />
useful i.e. if you have to go through a pabx).<br />
User Name The User name of your ISP login for PPP link establishment.<br />
Password The Password linked to the above login for PPP link establishment.<br />
Require secure authentication<br />
(CHAP)<br />
If this box is checked, then the <strong>eWON</strong> explicitly requests CHAP authentication for the PPP<br />
link. If the other side cannot do CHAP, no connection will be made. If this box is left<br />
unchecked, then PAP (clear text password) is used.<br />
Table 36: Modem Outgoing Server configuration controls<br />
RG-001-0-EN ver 1.14 <strong>eWON</strong>® - 02/05/2012 - ©<strong>eWON</strong> sa Page 43