LCLS Conceptual Design Report - Stanford Synchrotron Radiation ...

L C L S C O N C E P T U A L D E S I G N R E P O R T
15 K. Bane and P. Wilson, Proceedings of the 11th Int. Conf. on High Energy Accelerators, CERN
(Birkhuser Verlag, Basel, 1980), p. 592.
16 A. Berman, “Vacuum Engineering, Calculations, Formulas, and Solved Exercises,” Academic Press
(1992).
17 D. Behne, “Outgassing Test Results from PEP-II Standard Straight Section Vacuum Chambers,”
(1997).
18 C. Forester, et al., “Photon Stimulated Desorption (PSD) Measurements of Welded Copper Beam
Chambers for the PEP-II Asymetric B-Factory,” 4th European Particle Accelerator Conference
(1994).
19 M. Sullivan, “A Method for Calculating Pressure Profiles in Vacuum Pipes,” PEP-II AP Note No. 6-
94 (1994).
20 A. Chao, “Physics of Collective Beam Instabilities in High Energy Accelerators,” John Wiley (1993).
21 K.L.F. Bane, M. Sands, “The Short-Range Resistive Wall Wakefields,” Contributed to Micro
Bunches: A Workshop on the Production, Measurement and Applications of Short Bunches of
Electrons and Positrons in Linacs and Storage Rings, Upton, New York, September 28-30, 1995.
22 K. Bane and M. Sands, “Wakefields of Very Short Bunches in an Accelerating Cavity,” Particle
Accelerators, Vol. 25, pp. 73-05 (1990).
23 K. L. F. Bane, C. K. Ng, and A. W. Chao, Estimate of the impedance due to wall surface roughness,
Report SLAC-PUB-7514, SLAC (1997).
24 G. V. Stupakov, Phys. Rev. ST Accel. Beams 1, 064401 (1998).
25 G. Stupakov, R. E. Thomson, D. Walz, and R. Carr, Phys. Rev. ST Accel. Beams 2, 060701 (1999).
26 A. Novokhatski and A. Mosnier, in Proceedings of the 1997 Particle Accelerator Conference (IEEE,
Piscataway, NJ, 1997), pp. 1661–1663.
27 K. L. F. Bane and A. Novokhatskii, The Resonator impedance model of surface roughness applied to
the LCLS parameters, Tech. Rep. SLAC-AP-117, SLAC (March 1999).
28 G. V. Stupakov, in T. Roser and S. Y. Zhang, eds., Workshop on Instabilities of High Intensity
Hadron Beams in Rings (American Institute of Physics, New York, 1999), no. 496 in AIP Conference
Proceedings, pp. 341–350.
29 D. J. Whitehouse, Handbook of Surface Metrology (IOP Publishing, 1994).
30 K. J. Stout, Atlas of Machined Surfaces (Chapman and Hall, 1990).
31 Chatard-Moulin and A. Papiernik, IEEE Trans. Nucl. Sci. 26, 3523 (1979).
32 S. Krinsky, in W. S. Newman, ed., Proc. International Conference on High-Energy Accelerators,
Geneva, 1980, CERN, European Lab. for Particle Physics (Birkhäuser Verlag, Basel, Switzerland,
1980), p. 576.
33 R. L. Warnock, An Integro-Algebraic Equation for High Frequency Wake Fields in a Tube with
Smoothly Varying Radius, Report SLAC-PUB-6038, SLAC (1993).
34 K. L. F. Bane and G. V. Stupakov, Wake of a rough beam wall surface, Tech. Rep. SLAC-PUB-
8023, SLAC (December 1998), presented at International Computational Accelerator Physics
Conference (ICAP 98), Monterey, CA, 14-18 Sep 1998.
35 G. V. Stupakov, in Physics of, and Science with, the X-ray Free-Electron Laser (2000).
36 M. Dohlus, H. Schlarb, R. Wanzenberg, R. Lorenz, and T. Kamps, Estimation of longitudinal
wakefield effects in the TESLA-TTF FEL undulator beam pipe and diagnostic section, Tech. Rep.
DESY-TESLA-FEL-98-02, Deutsches Elektronen-Synchrotron, Hamburg, Germany (March 1998).
8-98 ♦ U N D U L A T O R