Community Building with ChatSpace Server Manual

Recommendations

Info

Handling Internal and External IP Addresses This section discusses the difference between external IP addresses (available on the Internet), NAT (Network Address Translation) addresses. NAT addresses are mapped in packet with an address comes in from the Internet, goes through a company router (or other device), then is translated to an internal IP address. Under normal NAT, the same internal IP address is usually assigned to the same computer each time. However, the LAN frequently uses DHCP (Dynamic Host Control Program) as well as NAT. The DHCP service keeps a pool of IP addresses, and assigns them to computers as they boot up and access the network. A PC can get a different IP address from this pool every time it connects. These setups potentially can be accessed from both internal users, and external users on the Internet. However, this access must be configured by the Network Administrator. Internal users must use the internal address, and external users must use the external address. Finally, internal addresses only can be used, but that means that only internal users can access the system. External users can also reach a system set up with NAT, but the Network Administrator has to specifically configure this access in the router. For example, a router’s external IP address is 11.222.333.1. The router has NAT on the internal side of the network. On the internal side, there are 20 computers, and one of them, 111.333.444.100, is running ChatSpace. on port 8000. Another computer on the internal side, 111.333.444.101, is running the company web site on port 80. The Network Administrator would have to configure the router to use a Virtual Server. That setup is basically just a mapping table that says: Line 1. Any request to my(router) port 8000 should be sent to 111.333.444.100 (on its port 8000). Line 2. Any request to my(router) port 80 should be sent to 111.333.444.101 (on its port 80). This is an example of NAT (Network Address Translation). PAT (Port Address Translation) would involve changing the port as well, so that you might have a definition like: Line 1. Any request to my(router) port 81 should be sent to 111.333.444.100 (on its port 8000). Line 2. Any request to my(router) port 80 should be sent to 111.333.444.101 (on its port 9000) 3
Database Usage Normally, Community Server installs itself into the SQL Server running on the computer. If no SQL Server is running on the computer, the installation program offers you the option of installing Microsoft Database Engine (MSDE), a lightweight version of SQL Server that is included with ChatSpace, or running against a database on another system. The MSDE installation takes place in the background during the ChatSpace installation. If an existing SQL Server is being used that resides on the same server as the ChatSpace Community Server, the installation program automatically creates the database and sets all of the required definitions. See the ChatSpace Installation and Quick Start Guide for instructions on selecting a database. Running against a Database on another Computer If you choose to set up Community Server’s database on a different computer, some additional steps are required to accomplish this: 1. Copy C:\Program Files\ChatSpace\Community Server\CSSrvr\Programs\ChatSpaceSetup.sql to the C:\ drive of the computer where the database resides. 2. Run the ChatSpaceSetup.sql script either by using the Query Analyzer tool in SQL Server’s Enterprise Manager, or by typing the following command from a command (MS-DOS) prompt: osql –E –I ChatSpaceSetup.sql Note You need Administrator access to the SQL Server computer and you need to know the account information (userid and password) for database access. If you do not have this access or information, contact the database administrator. 3. On the computer on which Community Server is installed, bring up the ODBC Data Source Definition for ChatSpace. a. Access the Windows Control Panel. b. Open Administrative Tools. c. Open Data Sources (ODBC). d. In the Data Sources window, click the System DSN tab. 4
Page 2 and 3: Community Building with ChatSpace S
Page 4 and 5: Clustering Servers Together .......
Page 6 and 7: Built-in Web Server Variables .....
Page 8 and 9: andomUserColor ....................
Page 10 and 11: Installing and Integrating for SOAP
Page 12 and 13: Room Moderators Guide Creating a Ro
Page 14 and 15: Setting Archiving .................
Page 16 and 17: CSConfig Table ....................
Page 18 and 19: 0.ChatSpace Configuration Guide The
Page 22 and 23: e. In the ODBC Data Sources window,
Page 24 and 25: Presence.asp?call=GetCommunityChatC
Page 26 and 27: Embedding Chat on a Page on your We
Page 28 and 29: Client Classes Client classes provi
Page 30 and 31: The Editing screen is displayed. 2.
Page 32 and 33: through the list of server addresse
Page 34 and 35: Note A Dynamic IP address should no
Page 36 and 37: 24 hour connectivity) to the Intern
Page 38 and 39: 8. Check the box labeled Auto Conne
Page 40 and 41: Using the example and the Los Angel
Page 42 and 43: General Tab Fields Server Name—th
Page 44 and 45: as not to clutter up the interface
Page 46 and 47: Database name—(Optional) the name
Page 48 and 49: Client Tab The Client tab contains
Page 50 and 51: The Client Class dialog box contain
Page 52 and 53: Clustering Tab The Clustering tab a
Page 54 and 55: Server Connections The Server Conne
Page 56 and 57: Security Tab The Security tab allow
Page 58 and 59: Forbidden Words This list filters t
Page 60 and 61: messages are sent by a member in le
Page 62 and 63: Operator/Admin Entry Fields Entry N
Page 64 and 65: Rooms Tab The Rooms tab allows you
Page 66 and 67: Delete—click this button to delet
Page 68 and 69: live queued room. As customers ente
Page 70 and 71:
Members Tab The Members tab contain
Page 72 and 73:
Info—this optional field provides
Page 74 and 75:
- Generate password to prove email
Page 76 and 77:
Security—click this link to acces
Page 78 and 79:
- Allow users to register rooms—c
Page 80 and 81:
0.Integration Guide Instant Messeng
Page 82 and 83:
Where YourSerialNumberHere represe
Page 84 and 85:
Name: Age: When the user en
Page 86 and 87:
Prefix commands The following varia
Page 88 and 89:
To use your own skins in the applet
Page 90 and 91:
Skins are saved in the path: C:\Pro
Page 92 and 93:
#These parameters set the backgroun
Page 94 and 95:
chatButtonSize Default is F8F8EE, w
Page 96 and 97:
defaultInputChannel dnd embed emoti
Page 98 and 99:
hideInput hideLogin hideLogout When
Page 100 and 101:
joinRooms joins joinSound key keys
Page 102 and 103:
userWidth msgSound The default sett
Page 104 and 105:
passPrompt This parameter specifies
Page 106 and 107:
quitURLTarget This parameter specif
Page 108 and 109:
Example: server=chat.chatspace.com
Page 110 and 111:
tabbedp2p tabs talkColor titleHeigh
Page 112 and 113:
voiceColor webProfile This paramete
Page 114 and 115:
doInput(String) Writes the string p
Page 116 and 117:
doQuit() This function simulates
Page 118 and 119:
See if client is floating Note Th
Page 120 and 121:
{ // This is the call being illustr
Page 122 and 123:
colors() This function returns bool
Page 124 and 125:
site and ChatSpace may not be on th
Page 126 and 127:
methods available for that COM obje
Page 128 and 129:
Non-COM example You can use the Sin
Page 130 and 131:
To restrict this access, create a s
Page 132 and 133:
You are now ready to run the Single
Page 134 and 135:
Connecting to the Chat Site 0.User
Page 136 and 137:
to an extremely simple interface. I
Page 138 and 139:
- Reenter—enter your password aga
Page 140 and 141:
Navigating to chats or forums is si
Page 142 and 143:
Sign Up—allows you to register fo
Page 144 and 145:
Modifying the Members List If you a
Page 146 and 147:
The Upload Group Image dialog is di
Page 148 and 149:
Top Toolbar Buttons Chat Options—
Page 150 and 151:
normal (not torn-off) position in t
Page 152 and 153:
Registered—when the member was re
Page 154 and 155:
Viewing Memos When you sign on, the
Page 156 and 157:
Using ChatSpace, a private message
Page 158 and 159:
Sounds Etiquette Sound—Sounds can
Page 160 and 161:
Note If the member has chosen to gi
Page 162 and 163:
- To select a different conference,
Page 164 and 165:
Messages are sent as HTML files and
Page 166 and 167:
4. Click Post to place the message
Page 168 and 169:
Note Rooms can also be created from
Page 170 and 171:
Room Options Tab The Room Options t
Page 172 and 173:
Table 1 Room Options Tab Fields and
Page 174 and 175:
The tab also provides list of membe
Page 176 and 177:
Note A Room Moderator can only kill
Page 178 and 179:
Room Moderator Message Routing Opti
Page 180 and 181:
Administrator may configure the sys
Page 182 and 183:
Check Amount is Lines (not min.) to
Page 184 and 185:
This command triggers all settings
Page 186 and 187:
Logging In Several methods are avai
Page 188 and 189:
Grant status—an administrator can
Page 190 and 191:
6. Enter a password in the adjacent
Page 192 and 193:
Granting Operator or Administrator
Page 194 and 195:
Step One: Finding Out the Member’
Page 196 and 197:
Anywhere In a Word Setting On the F
Page 198 and 199:
Use the arrow buttons to navigate b
Page 200 and 201:
database. Many 3rd part tools exist
Page 202 and 203:
Enabling Instant Messenger Integrat
Page 204 and 205:
All—lists all of your ChatSpace b
Page 206 and 207:
The privacy dialog box is displayed
Page 208 and 209:
Setting Away Status You can set Ins
Page 210 and 211:
Setting up Live Events This feature
Page 212 and 213:
After you have logged in as the mod
Page 214 and 215:
0.Live Help Guide Live Help allows
Page 216 and 217:
- or - where AnySuitableImageYo
Page 218 and 219:
client. The default setting is the
Page 220 and 221:
clearakills (Administrators only) r
Page 222 and 223:
pass Sends the password for your re
Page 224 and 225:
who Lists all members in a particul
Page 226 and 227:
Example: /Services SET #support TRA
Page 228 and 229:
Syntax: /Services BUDDY yourNicknam
Page 230 and 231:
Note Each table is described in the
Page 232 and 233:
Columns RoomMembers Table Name Type
Page 234 and 235:
Columns Name Type Description Id Lo
Page 236 and 237:
Bans Table The Bans table contains
Page 238 and 239:
Columns Record Types: BanEvents Nam
Page 240 and 241:
exceptional events including passwo
Page 242 and 243:
Impersonatesvcagent A member has at
Page 244 and 245:
Record Types Connect Another server
Page 246 and 247:
Columns SOAP Interface SOAP (Simple
Page 248 and 249:
TargPass - New Password of nickname
Page 250 and 251:
Parameters: Nick (nickname of membe
Page 252 and 253:
DelRoomMember Purpose: Deletes a ro
Page 254 and 255:
AddRoomBan Purpose: Adds a room ban
Page 256 and 257:
Returns: Build number of the ChatSp
show all

Community Building with ChatSpace Server Manual

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?