Manual de diseño de Obras Civiles [Diseño por Viento] CFEV08

COMENTARIOS
BS EN 1991-1-4 (2005), British Standard. Eurocode 1: “Actions on structures. Part 1-4.
General actions – Wind actions”. European Committee for Standardization.
Cermak, J. E. (1986), “Application of fluid mechanics to wind engineering”, Freeman
Scholar Lecture, J. of Fluids Eng., ASME, Vol. 97, No.1.
Cheung, C. K. (1983), “Effect of turbulence on the aerodynamics and response of a
circular structure in wind flow”, Ph. D. Thesis. Monash University, Melbourne.
Cheung, J. C. K.; Holmes, J. D.; Melbourne, W. H. (1992), “High Reynolds member wind
tunnel measurements of pressures on a curved roof building”, Proceedings of the 11 th
Australasian Fluids Mechanics Conference, University of Tasmania, Hobart.
CSA S37-01 (2006), “Antennas, Towers, and Antenna-Supporting Structures”, Canadian
Standards Association, Canada, (updated 2004, 2006).
Delaney, N. K.; Sorensen, N. E. (1953), “Low-speed drag of cylinders of various
shapes”, Technical note 3038, National Advisory Committee for Aeronautics.
Designers’ Guide to EN 1991-1-4 (2007), Eurocode 1: “Actions on structures, general
actions. Part 1-4: Wind actions”, Thomas Telford Publishing.
Designers’ Guide to EN 1990 (2002), Eurocode: “Basis of structural design”, Thomas
Telford Publishing.
Diniz, S.; Simiu, E. (2005), “Probabilistic description of wind effects and load factors for
database – assisted design”, J. Struct. Eng., 131, pp. 507 – 516.
DS 410 E:2004, “Code of Practice for Loads for the Design of Structures”, Norm for last
på konstruktioner. Danish Standards Association.
ESDU (1987), “Calculation methods for along-wind loading, Part 2: Response of line-like
structures to atmospheric turbulence”, Data Item 87035, Engineering Sciences Data
Unit, London, December (amended 1989).
ESDU (1981), “Lattice Structures, Part 2, Mean fluid forces on tower like space frames”;
Data Item 81028, Engineering Sciences Data Unit, London, (revised 1988, 1993).
ESDU (1980), “Mean forces, pressures and flow field velocities for circular cylindrical
structures: single cylinder with two-dimensional flow”, data item 80025, Eng. Science
Data Unit (revised 1986).
4.3 II. 20