28.01.2023 Views

Manual de diseño de Obras Civiles [Diseño por Viento] CFEV08

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

COMENTARIOS

Holmes, J. D.; Banks, R. W.; Roberts, G. (1993b), “Drag and aerodynamic interference

on microwave dish antenna, and their supporting towers”, J. of Wind Eng. and Industrial

Aerodynamics, Vol. 50, pp. 263-269.

Holmes, J. D. (1987), “Wind loading of multi-span buildings”, First Structural Engineering

Conference, Melbourne, Australia, 26-28 August.

Holmes, J. D. (1986), "Pressure and drag on surface-mounted rectangular plates and

walls", 9 th Australian Fluid Mechanics Conference, Auckland, Australia.

Holmes, J. D. (1979), “Mean and fluctuating internal pressures induced by wind”, Proc.

5 th Int. Conference on Wind Eng., Fort Collins, Colorado, U. S. A., pp. 435-450.

IASSS (1981), “Recommendations for Guyed Masts”, Working Party No. 4, International

Association for Shell and Spatial Structures, Madrid.

ISO 4354:1997(E), “Wind actions on structures”, International Organization for

Standardization, Switzerland.

Johnson, G. L.; Surry, D.; NG, W. K. (1985), "Turbulent wind loads on arch-roof

structures: a review of model and full-scale results, and the effect of Reynolds number",

Proceedings of the Fifth U.S. National Conference on Wind Engineering, Lubbock,

Texas, U. S. A., pp 6-8, November.

Letchford, C. W. (1985), “Wind loads on free standing walls”, Department of Engineering

Science, Oxford University, OUEL Report 1599/85.

MacDonald, P. A.; Kwok, K. C. S.; Holmes, J. D. (1988), “Wind loads on storage bins,

silos and tanks I, point pressure measurements on isolated structures”, J. of Wind Eng.

and Industrial Aerodynamics, Vol. 31, pp.165-188.

MacDonald, P. A.; Holmes, J. D.; Kwok, K. C. S. (1990), “Wind loads on circular storage

bins, silos and tanks. II. Effect of grouping”, J. of Wind Eng. and Industrial

Aerodynamics, Vol. 34, pp. 77-95.

Metal Building Manufacturers Association (2006), “Metal building systems manual”,

Design practices code of standard practice guide specifications nomenclature, U. S. A.

National Research Council of Canada (2005), “National Building Code of Canada”,

Canadian Commission on Building and Fire Codes.

4.3 II. 22

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!