Manual de diseño de Obras Civiles [Diseño por Viento] CFEV08

COMENTARIOS
Katagiri, J.; Ohkuma, T.; Marukawa, H. (2002), “Analytical method for coupled acrosswind
and torsional wind responses with motion-induced wind forces”, Journal of Wind
Engineering and Industrial Aerodynamics, Vol. 90, pp. 1795-1805.
Katsumura, A.; Katagiri, J.; Marukawa, H.; Fujii, K. (2001), “Effects of side ratio on
characteristics of across-wind and torsional responses of high-rise buildings”, Journal of
Wind Engineering and Industrial Aerodynamics, Vol. 89, pp. 1433-1444.
Kijewski, T.; Kareem, A. (1998), “Dynamic wind effects: a comparative study of
provisions in codes and standards with wind tunnel data”, Wind and Structures, Vol. 1,
No. 1, pp. 77-109.
Kun, K. D.; Kareem, A. (2007), “Gust-front factor: A new framework for the analysis of
wind load effects in gust-fronts”, Proceeding of the 12th International Conference on
Wind Engineering, Cairns, Australia, July, 1-6.
Lewis, W. J. (2003), “Tension structures, Form and behavior”, Thomas Telford.
Madugula, M. S. (2002), “Dynamics Response of Lattice Towers and Guyed Masts”,
ASCE, SEI, Structural Engineering Institute.
McNamara, R. J.; Huang, C. D. (2002), “Wind Torsional Effects on High Rise Buildings”,
McNamara-Salvia, Inc. Boston, MA 02110.
Melbourne, W. H. (1988), “Comfort criteria for wind-induced motion in structures”,
Structural Engineering International, Vol. 8, No. 1, pp. 40-44.
Novak, M. (1972), “Galloping oscillations of prismatic structures”, J. of the Eng. Mech.
Division, ASCE, Vol. 98, 1972, pp. 27-46.
Novak, M. (1969), “Aeroelastic galloping of prismatic bodies”, J. of the Eng. Mech.
Division, ASCE, Vol. 95, No. EM1, pp. 115-142.
Rank, E.; Halfmann, A.; Scholz, D.; Breuer, M.; Durst, F.; Kaiser, U.; Bergmann, D.;
Wagner, S. (2003), “Wind loads lightweight structures: Numerical simulation and wind
tunnel tests”, Bauingenieur, Nov.
Shuguo, L.; Shengchun, L.; Li, Q. S.; Zhang, L.; Gu, M. (2002), “Mathematical model of
acrosswind dynamic loads on rectangular tall buildings”, Journal of Wind Engineering
and Industrial Aerodynamics, Vol. 90, pp. 1757-1770.
4.4. II. 22