<strong>Holz</strong>werkstoffe Anlage einen neuartigen Leichtbauplattentyp produzieren. Dieser Plattentyp wurde bereits für den Einsatz bei Ikea-Möbeln freigegeben. Sobald auch die Produktionsfreigabe vorliegt, soll die endgültige Investitionsentscheidung fallen. Bei der im April 2010 übernommenen Swedspan France S.à.r.l., Lure, wurden im Verlauf der letzten Monate größere Modernisierungsinvestitionen mit einem Gesamtvolumen von 20 Mio € umgesetzt. Parallel dazu prüft das Unternehmen dort einen Ausbau der Weiterverarbeitungskapazitäten; neben der Installation einer Folienkaschieranlage steht dabei auch der Bau einer neuen Kurztaktpresse zur Diskussion. Swedspan produziert in Lure derzeit noch auf einer Kurztaktpresse; die ältere Anlage wurde im vergangenen Jahr in die Türkei verkauft. VMG Industries wird nur für Ikea produzieren Das von der zur litauischen UAB Vakaru Medienos Grupe (VMG), Klaipeda/ Swedspan Polska planning to produce thin boards as from end of June 66 Litauen, gehörenden VMG Industries in der Freihandelszone Mogilev geplante Spanplattenwerk wird ausschließlich für den Ikea-Konzern produzieren. Die im Juni 2010 bei der Siempelkamp Maschinen- <strong>und</strong> Anlagenbau GmbH & Co. KG, Krefeld, bestellte Komplettanlage ist auf eine Jahreskapazität von r<strong>und</strong> 165.000 m³ ausgelegt. Mit dem Bau wurde Anfang 2011 begonnen. Die Inbetriebnahme wurde auf das dritte Quartal 2011 terminiert; die volle Kapazität soll bis Ende 2011 erreicht werden. Im Rahmen des Gesamtprojektes sollen auf einem benachbarten Gelände eine Möbelteilfertigung, eine Sperrholz- <strong>und</strong> Formteileproduktion sowie eine Energieanlage errichtet werden. Die VMG-Planungen sehen zudem den Bau eines Möbelwerkes vor, in dem voraussichtlich Küchenmöbel für die Ikea-Produktlinie „Faktum“ produziert werden sollen. Parallel dazu wird die litauische SBA Group, Vilnius, am gleichen Standort ein Werk für furnierbeschichtete Möbel errichten, das die Swedspan Polska Sp.zo.o. of Orla, Poland, part of the Swedspan group, largely completed the mechanical installation work for the new thin-board plant by mid- April. The plant components are to be put into service in stages as from May; production of the first board is scheduled for the end of June. Regular production is to begin with capacity utilisation of aro<strong>und</strong> 80% as from September; Swedspan is aiming to switch to non-stop production shortly afterwards. The Polish furniture factories of Swedwood International AB of Ångelholm, Sweden, which, like Swedspan, are part of the “Industry Group” of the Ikea holding company Ingka Beheer B.V. of Amsterdam, Netherlands, and other furniture manufacturers producing for Ikea are to be supplied as from September, too, once the quality standards have been reached. These Ikea suppliers are to take delivery of roughly 75% of the MDF/HDF output from Orla in the first business year 2011/2012 (31. August). The remaining 25% are earmarked for the free market. The production capacity of the plant supplied by Dieffenbacher GmbH & Co. KG of Eppingen will be aro<strong>und</strong> 800 m³ per day or approximately 265,000 m³ per year. In a first step, a laminating plant and a cutting saw are to be installed in the already largely completed value-adding hall sometime in the second half-year; the start-up is scheduled for March 2012 in each case. Foil-lamination is to reach an annual capacity of 65,000 m³ or 25m m² in three-shift operation. An annual capacity of approximately 55,000 m³ is planned for the sizing unit in two-shift operation. The first large-format laminated boards are to be delivered in April 2012. Marketing of cut-sizes is scheduled to start in May 2012. Value-adding will be expanded to include drilled and folded boards parallel to this. A second finishing line is to be installed at a later date. Ikea-Produktlinie „Malm“ fertigen soll. Die in Mogilev produzierten Möbel sollen in erster Linie auf den Märkten in Weißrussland, Russland <strong>und</strong> der Ukraine abgesetzt werden. Der zu VMG gehörende Spanplatten- <strong>und</strong> Möbelhersteller AB Klaipedos Mediena, Klaipeda, liefert bereits seit mehreren Jahren in größerem Umfang an Ikea. Das Unternehmen produziert seit 1994 rohe <strong>und</strong> beschichtete Spanplatten; die Produktionskapazität beläuft sich auf r<strong>und</strong> 140.000 m³/Jahr. Die im Jahr 2002 aufgenommene Möbelproduktion ist inzwischen in erster Linie auf Faktum- Küchenmöbel ausgerichtet. Anfänglich war in dem Werk auch die Produktlinie „Pax“ für Ikea produziert worden; dieses Programm wurde später aber zu einem anderen Ikea-Lieferanten verlagert. Die SBA Group fertigt bei der ebenfalls litauischen Tochtergesellschaft AB Klaipedos Baldai, Klaipeda, bereits seit längerer Zeit Malm-Möbel für Ikea. Die im Jahr 2002 gegründete VMG kooperiert bereits seit mehreren Jahren mit Ikea <strong>und</strong> ist inzwischen einer der größten Ikea-Lieferanten im Baltikum. Das damals zu VMG <strong>und</strong> der AB Vilnius Baldai, Vilnius, gehörende Unternehmen UAB Giriu Bizonas, Kazlu Ruda, hatte im Rahmen eines größeren Investitionsprogramms im Jahr 2005 ein neues Möbelwerk <strong>und</strong> 2007 ein neues Spanplattenwerk in Betrieb genommen. Der Auftrag für die Spanplattenlinie war damals ebenfalls an Siempelkamp gegangen. An beiden Investitionen hatte sich die Ikea-Gruppe beteiligt. Im Gegenzug war der Großteil der Spanplatten- <strong>und</strong> Möbelproduktion von Giriu Bizonas über langfristige Lieferverträge an Ikea geliefert geworden. Im Dezember 2008 hatte Ikea über die Ingka Holding B.V. schließlich alle Anteile an Giriu Bizonas übernommen. Das in der Folge in UAB Swedspan Giriu Bizonas umfirmierte Unternehmen hatte anfänglich sowohl die Spanplatten- als auch die Möbelproduktion fortgeführt. Die Möbelproduktion war dann allerdings ausgegliedert <strong>und</strong> per Ende September 2009 an Swedwood veräußert worden. <strong>EUWID</strong> <strong>Holz</strong> <strong>special</strong>: <strong>Holz</strong>werkstoffe & Oberflächen
Kotkamills turns softwood into magnificent products including laminating papers, matt coated printing paper and sawn products. We bring out the best from wood for laminate, wood panel and construction, as well as for the publishing industry. Our brands – Absorbex ® , Imprex ® and Solaris – are the result of decades of extensive R&D and close collaboration with our customers. Our traditions and roots stretch back to 1872. www.kotkamills.com Spruce – Picea abies Meet us at Ligna 2011 in Hannover, Hall 27 J 36 in 30 May–3 June!