HEADING PAGE - port of ploce authority * welcome
HEADING PAGE - port of ploce authority * welcome
HEADING PAGE - port of ploce authority * welcome
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ENVIRONMENTAL IMPACT STUDY<br />
Rn: 03-033 CONTAINER TERMINAL PLOCE <strong>PAGE</strong>: 19<br />
C.1.3.2.4. PROTECTIVE MEASURES FOR PORT MECHANICAL EQUIPMENT AND<br />
SUB-STATIONS<br />
The use <strong>of</strong> hydraulic oils and oils that contain hazardous substances such as<br />
polychlorinated biphenyl is not allowed for lubrication <strong>of</strong> <strong>port</strong> mechanical<br />
equipment.<br />
Also, polychlorinated biphenyl transformer oil shall not be used in substations.<br />
We propose the sub-stations <strong>of</strong> dry cooling type.<br />
C.1.3.2.5. PROTECTIVE MEASURES – WASTE WATER<br />
• Construct distributing sewage system for sanitary-sewage waste<br />
water, rain waste water from the traffic and operative <strong>port</strong> surfaces and<br />
“clean” rain-ro<strong>of</strong> water.<br />
• Waste water originating from washing out traffic (road) and operative<br />
<strong>port</strong> surfaces, have to be purified in the traps – sedimentation<br />
chambers. Waste water at the outlet <strong>of</strong> the trap has to satisfy the<br />
following criteria: total suspended matter 20 mg/L, total oils and grease<br />
25 mg/L, mineral oils 5 mg/L.<br />
• Sanitary-sewage waste water has to be conducted into public sewage<br />
system <strong>of</strong> the town <strong>of</strong> Ploce.<br />
C.1.3.2.6. NOISE PROTECTIVE MEASURES<br />
Environmental protection in view <strong>of</strong> noise pollution can be performed by<br />
applying two types <strong>of</strong> measures:<br />
• TECHNOLOGICAL MEASURES<br />
• TECHNICAL MEASURES<br />
C.1.3.2.6.1. TECHNOLOGICAL MEASURES<br />
Technological measures that shall be taken against noise in the technological<br />
process during construction include the following:<br />
- Among different procedures <strong>of</strong> process development, particularly<br />
concerning goods handling during unloading, transloading, storing,<br />
shifting, etc. it should be selected the one that emits noise <strong>of</strong> lesser<br />
intensity.<br />
- Among the necessary machines and devices (cranes, transtainers, bridge<br />
cranes, tractors, container trans<strong>port</strong>ers, forklifts, etc.), the technology<br />
should be adjusted to machines and devices for which the bidder can<br />
prove that develop the least level <strong>of</strong> noise.<br />
- From the range <strong>of</strong> tools by which individual operations can be successfully<br />
accomplished, it should be selected those tools which, with correct use,<br />
emit the least noise. This particularly refers to tools that cause peak noise.<br />
RIJEKAPROJEKT d.o.o.
Change language