HEADING PAGE - port of ploce authority * welcome
HEADING PAGE - port of ploce authority * welcome
HEADING PAGE - port of ploce authority * welcome
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
ENVIRONMENTAL IMPACT STUDY<br />
Rn: 03-033 CONTAINER TERMINAL PLOCE <strong>PAGE</strong>: 20<br />
C.1.3.2.6.2. TECHNICAL MEASURES<br />
Technical measures by which technical means enabling normal development<br />
<strong>of</strong> the technological process during INTERVENTION, are protected against<br />
noise as follows:<br />
- all mechanical and other equipment that are used in the process<br />
development technology has to be in working order. Therefore the<br />
maintenance <strong>of</strong> equipment has to be very well organized;<br />
- the cooperation with trans<strong>port</strong> companies that shall perform trans<strong>port</strong> in<br />
arrival and departure shall be conditioned by their utilization <strong>of</strong> the most<br />
up-to-date trans<strong>port</strong> means (road and railway). It is <strong>of</strong> particular<br />
im<strong>port</strong>ance that electric towing is used for trans<strong>port</strong>ation by a railroad;<br />
- railway has to be <strong>of</strong> the most recent design including the protection<br />
against spreading <strong>of</strong> vibrations (structure noise);<br />
- road overpasses have to be provided with the elements against spreading<br />
<strong>of</strong> structure noise and vibrations;<br />
- it has to be foreseen the construction <strong>of</strong> noise barriers on specially<br />
sensitive points where noise emission above allowed values cannot be<br />
avoided (on exit ramps – road vehicle overpass, road and railway route<br />
sections behind residential buildings).<br />
The mentioned TECHNICAL AND TECHNOLOGICAL MEASURES shall be<br />
elaborated in details in detailed and working civil engineering, architectural,<br />
technological, technical and traffic designs.<br />
C.1.3.2.7. WASTE PROTECTIVE MEASURES<br />
All hazardous waste developed in the <strong>port</strong> area has to collected separately.<br />
Separate storing facility for hazardous waste has to be provided.<br />
Hazardous material storing facility has to meet the prescribed technical<br />
and technological requirements:<br />
• separate waste storing by types has to be made possible;<br />
• storing facility has to be provided with a base from which bulk and<br />
spilled waste can be collected and with a waste water collection<br />
system;<br />
• storing facility has to be equipped with devices, equipment and<br />
information means for extinguishing and prevention <strong>of</strong> fire<br />
spreading;<br />
• waste storing facility has to be so equipped to prevent scattering and<br />
spilling <strong>of</strong> waste;<br />
• vehicle that trans<strong>port</strong>s the waste to the storing facility has to be so<br />
equipped to prevent scattering and spilling <strong>of</strong> waste.<br />
Packaging waste shall be collected separately and specially marked.<br />
Municipal and other similar waste shall be collected separately in special<br />
recipients, which shall be regularly emptied.<br />
RIJEKAPROJEKT d.o.o.