MFG/PRO 9.0 User Guide Volume 3: Manufacturing - QAD.com

Transfer the Inventory
Use Repetitive Picklist Transfer (18.22.3.6) to transfer inventory from the
stocking location to the work center. The new location must exist and
must have the same name as the work center. After transferring the
inventory, the system deletes the picklist.
Specify the date of the transfer in a pop-up window after selecting Go
from the header. The default is the system date.
Use the Sequence code to transfer only part of the total if space at the
work center is limited.
Example If a work center holds 1,000 of an item, but the total
requirements are 5,000, one picklist is created allocating 5,000, while the
material is picked and transferred in sequences of 1,000 (sequence 1 for
1,000, sequence 2 for 1,000, and so on).
Set the maximum order quantity for an item in the Order Multiple field
(Ord Mult) in Item Planning Maintenance (1.4.7) or Item-Site Planning
Maintenance (1.4.17).
To transfer specified quantities other than the order maximum, set the
amount in Order Mult.
Example If the stocking unit of an item is liters but the item is delivered
to the work center in 500-liter barrels, set an order multiple of 500 to
ensure the item is transferred 500 liters at a time.
ADVANCED REPETITIVE 159
Tip
Inventory is transferred,
not issued.
Fig. 8.12
Repetitive Picklist
Transfer (18.22.3.6)