MFG/PRO 9.0 User Guide Volume 3: Manufacturing - QAD.com

Common Transaction Data
All repetitive transactions use common information entered in the first
frame. Figure 8.13 shows the first frame of Backflush Transaction
(18.22.13).
The Employee field is mandatory. Enter a valid employee set up either in
Employee Maintenance (29.15.1) or Actual Pay Rate Maintenance
(14.13.21). A valid effective date, site, item number, and operation are
required. Shift is optional.
If the item number is associated with a production line, you must enter a
valid production line in the Line field. Enter Routing and BOM only if
you are not using the default. ID is a system-generated cumulative order
ID and cannot be modified.
The system uses the values entered in the Effective, Site, Item Number,
Operation, (Production) Line, BOM, and Routing fields to locate the
appropriate cumulative order.
The selected cumulative order has start and end effective dates that
include the transaction effective date. Table 8.2 describes the way a
cumulative order is selected, based on the effective date entered.
If Then
a cumulative order has a blank start
effective date, its effective interval is
from the end effective date into the
indefinite past
a cumulative order has a blank end
effective date
it will always be selected if the transaction
effective date is on or before the end
effective date.
its effective interval is from its start
effective date into the indefinite future, and
will always be selected if the transaction
effective date is on or after the start
effective date.
ADVANCED REPETITIVE 165
Fig. 8.13
Transaction
Programs—
Common
Information
Table 8.2
How a Cumulative
Order is Selected