REQUEST FOR PROPOSALS RFP NUMBER: 0A1031 DATE ISSUED

Demonstration Criteria.
The maximum number of allowable failures during the demonstration of the DL/ID Issuance System and
for the demonstration of the document processing equipment is set forth below. If the maximum number
of allowable failures is exceeded during the demonstration, the Proposal may be disqualified. (This
criterion may not be all-inclusive. The RFP further defines the requirements for the DL/ID system.)
FAILURE MAXIMUM NUMBER OF ALLOWABLE FAILURES
Page 16 of 115
Printer(s)
Document Processing
Equipment
1. Equipment malfunction or jam. One Restart One Restart
2. DL/ID damaged in operation. One Restart One Restart
Additional Demonstration Criteria Meets
Examination of internal and external features of the printer offered and ease of using
printer.
The offeror must demonstrate that the printer starts up and is ready to produce a
finished license including integration with the ODPS issuing program within five (5)
minutes.
The offeror must demonstrate minimal intervention to operate the printer(s),
regardless of the distribution of the data between one or more printers.
Examination of internal and external features of the camera offered and ease of
using the camera.
The offeror must demonstrate that the camera is ready within fifteen (15) seconds
after startup and five (5) seconds after taking a photograph to recycle for next
photograph. The camera must also produce a finished photograph for license
integration with the ODPS issuing software drivers program and allow for time to
close down and secure the system.
The offeror must demonstrate minimal intervention to operate the camera, regardless
of the distribution of the data between one or more printers.
The offeror must provide a Motorola Symbol PD8750 for demonstration.
The offeror must provide blank card and other materials to produce a finished license
that meet the RFP requirements.
The offeror must produce a finished DL/ID that meets all the card requirements as
outlined in the RFP.
The offeror must produce system laminates both sides of DL/ID without problems.
The offeror must demonstrate the proposed solution can perform duplex printing.
The offeror must demonstrate a print “flipping station”, if applicable, and operate
efficiently without problems.
Does
Not
Meet