REQUEST FOR PROPOSALS RFP NUMBER: 0A1031 DATE ISSUED

Image Capture Solution Capabilities. The image capture solution must transmit a bitmap file
(.bmp) with the following characteristics:
Width: 300 pixels
Height: 300 pixels
Horizontal resolution: 96 dpi
Vertical resolution: 96 dpi
Bit depth: 24
Any proprietary software development kit (SDK) that is required to use the image capture solution
must be included as part of the Proposal.
Image Capture Solution Quantity. A total of two hundred thirty-two (232) new digital Image
Capture Solution will be a part of the proposed solution. The 2 CSC, 216 DR locations, DTS, Alpha
Test Environment, and IT will each have one (1) new digital camera in operation. Ten Image Capture
Solutions are required for the inventory bank.
In the event the quantity of inventory cameras must be replenished and the model approved is no
longer available, the replacement camera must be approved by ODPS before issuance to any DR.
Image Consistency. The proposed image capture solution must provide the best available image
quality for related functions such as card printing and automated photo comparison; therefore, the
proposed image capture solution (camera & software driver) must provide an absolute consistency in
the following areas:
• The full-face or frontal pose must be utilized for all photo images.
• The subject’s captured facial image must always be in focus from the nose to the ears.
• The photo image being captured (full-face pose) must be positioned to satisfy all of the following
conditions:
o The approximate horizontal midpoints of the mouth and of the bridge of the nose must lie on
an imaginary vertical straight line positioned at the horizontal center of the image. See line
AA in Diagram #1.
o An imaginary horizontal line through the center of the subject’s eyes must be located at
approximately 55% point of the vertical distance up from the bottom edge of the captured
image. See line BB in Diagram #1.
o The width of the subject’s head must occupy approximately 50% of the width of the total
image width. This width must be the horizontal distance between the midpoints of two
imaginary vertical lines. Each imaginary line must be drawn between the upper and lower
lobes of each ear and must be positioned where the external ear connects to the head. See
line CC in diagram #1.
Diagram # 1 – Image Consistency
Page 44 of 115