06.08.2013 Views

Class-8 Heavy Truck Duty Cycle Project Final Report - Center for ...

Class-8 Heavy Truck Duty Cycle Project Final Report - Center for ...

Class-8 Heavy Truck Duty Cycle Project Final Report - Center for ...

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

the equipment inside from overheating. A filter is installed over the fan<br />

opening to keep dust out of the container.<br />

5.2. Main Terminal Block<br />

The terminal block shown in Figure 5.2 is installed in the eDAQ/VBOX<br />

container lid. On the left side, two Turck cables go to Vehicle Bus Modules<br />

(VBM), which are then connected directly to the eDAQ by a Turck cable. Each<br />

row of the terminal block is electrically connected, linking the J1708 VBM to<br />

the Air-Weigh, and the CAN J1939 VBM to the J1939 vehicle data bus and<br />

VBOX.<br />

Figure 5.2: Main Terminal Block Wiring Diagram<br />

5.3. Air-Weigh and J1939 Vehicle Data Bus<br />

The Air-Weigh and J1939 vehicle data bus connections shown above are<br />

connected from the terminal block to the dashboard fuse panel with a single<br />

cable containing three twisted pairs with green, red, and blue casings. Figure<br />

5.3 shows the connections made at the dashboard fuse panel end of this<br />

cable.<br />

D-14

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!