Class-8 Heavy Truck Duty Cycle Project Final Report - Center for ...

Figure 7.2.4-1: Transducer and Message Channel Setup Window
3) Set up the AirWeigh channels
a) Select the blank line at the bottom of the transducer channel list
and click Add.
b) Select Vehicle Bus (DIO) from the list and click OK.
c) Select VBM_1 : J1708 : AirWeigh_Alone and click OK.
d) Select the following channel IDs and click OK.
SterAWID
TrlrAWID
SterAxWt
DrivAxWt
TrailrWt
e) With the AirWeigh channels selected, click Edit.
f) Select the Query and Sample Rates option and click OK.
g) Change the output sample rate to 5 Hz and click OK.
h) Select just SterAWID and TrlrAWID, click Edit, select the
Query and Sample Rates option and click OK.
i) Check the Enable Active Querying option and set the rate to 1
Hz.
D-37