siemens - Public Service Commission

Alstom Proposal # SD22007, CR3 EPU Turbine Generator Retrofit Meeting Notes, 05/15/07: Pg. 7 of 7
Commercial Comments:
0 Master Service agreement # 139805 open issue discussion.
- Re: Alstom needs to provide name of person in Alstom who is responsible to negotiate contract.
0 MSR material cost is REDACTED J This appears excessive. Explain basis of cost.
- Re: Alstom agrees it is high but can not cut the cost in half. Alstom can work with other MSR vendors.
0 HP / LP Turbine material cost is aREDACTEDkThis appears high for LP turbine “blade carrier” solution and reuse of HP turbine nozzle box.
Explain basis of cost.
- Re: material cost / Euro / shop utilization. Larger LP turbine with inner cylinder was stated to be approximateljq
DACTEDbore.
0 Would Alstom accept total project management responsibility if PE assigned required support labor to Alstom?
- Re: alstom stated the estimated installation included all support resources.
0 Proposal states installation is T&M billing. PE prefers fixed cost for total project scope.
- Re: Can be fixed cost after a defined scope of work is established. PE can provide support resources.
Propress Energv Ouestions:
0 EH tubing will be impacted by MSR replacement.
0 Engineering Change and Work Order Package development.
0 Radiological support and material decontamination contingency.
0 O&M replacement of extraction pipe expansion joints?
0 Any other turbine plant major equipment replacements must be integrated into turbine generator schedule for crane usage and logistics
coordination.