siemens - Public Service Commission

1.
2.
3.
4.
5.
6.
7.
8.
On the spot engineering resolution to any “as is” deviations or
nonconformances, thus protecting schedule.
A single responsibility and expertise in the installation execution and a
consistent continuity.
Contingency plans for unexpected bottleneck, delays or obstructions.
Adjusting, if needed, day to day current work plan to meet any obstacles.
Assessing potential problems will assure preparedness and expeditious resolution
of same.
TEI, as an MSR designer / fabricator will assure careful installation of the
vessels so as to avoid damage to existing MSR structure.
Key installation people are veterans of similar jobs with hands-on and recent
experience. They will do-it-right at CR-3 the first time, since for them it will not
be the first time.
TEI’s knowledge of the job provides for responsible, realistic and achievable
installation schedule.
TEI when installing its own MSR replacement equipment carries an undivided
responsibility for the integrity of the vessels and structure.
TEI is a custom installer of this type of equipment. We are not a general
construction company. This job will be reviewed week-by-week by TEI’s top
management; CR-3 will be given direct access to TEI’s corporate management.
2.0
SCOPE OF SUPPLY AND SERVICES
2.1 Equipment
a. Four (4) complete MSR vessels, built to ASME Code (as shown below),
delivered to site F.O.B., Nz purged, uninsulated, painted, with integral supports
to match existing locations.
b. Eight (8) excess steam flow regulating valves, S.S. trim.
c. Monitoring, integral instrumentation and matching readout devices.
d. All required pipe spools, designed to B3 1.1, to match existing cut lines.
e. Spare gaskets, tube plugs, chevron vanes and sample tube sections.
f. Complete documents package including: Q.A. documentation file, design
calculations, operatiodmaintenance manual and equipment drawings.