Version 5.3.02 - Serendipity Software

More documents

Recommendations

Info

file format (the Imaged file). Choices are Faster or Better. The default is Faster. • Maximum Print Preview Resolution – Set the maximum resolution for the rendered preview. The default is 180dpi. • Polling Service Refresh – Set the interval between poll service checks, i.e., how long between checks to see if any RIPs require polling. The default is 50 seconds if the times are left at 0. • Server Back Log – Number of days to keep the log. Older days are trimmed when the Server starts. Zero (0) means the log will not be trimmed. • Processes – Control the number of processes the machine will handle, i.e., the number of Imaging and Rendering tasks simultaneously run on the Server. The defaults are 1/1. Up to one imaging and rendering task can be set per CPU core the Server machine possesses. In practice, it is recommended the combined number of imaging and rendering tasks be set to no more than the number of cores. For example, 4 CPU cores = 2 Image/2 Render. • Minimum Broadcast Interval – Set the interval between the Server sending out updates to connected Clients. The default interval is 2sec. High-‐end systems with good networking are able to set the interval to 0sec for slightly improved image/render times when processing large numbers of jobs. Sites using the Client remotely connected via the internet should set a longer polling interval of 10-‐20sec. • Output Unknown Files to Printer – Output any unknown files direct to a printer. If this is unchecked, any unknown files will result in errors and will not be output. • Log Printed Jobs – When enabled, this option will log completed print jobs in the Server log. The jobname and dimensions are noted. • Secure Mode – Enable or disable Secure Mode. • Mail Server – Enter the details of the mail server for error notification emails when using Secure Mode. • Sender Email Address – Enter the details of the Sender (From) address for error notification emails. Colour Management • ICC Engine Accuracy – Select Faster or Better, depending on preferences. • Default ICC Profiles – Select the default ICC profiles used when first creating a new Pagesetup (Input profiles) and Media (Output profiles). • Version 3.4 spot colour handling – This is a compatibility setting for users with Spot colour setups, upgraded from Versions v3.4 or earlier to get consistent results from spot jobs. It is recommended as a temporary setting only and setups should be recreated using the improved and more accurate (post v3.4) spot colour handling. • Apply ICC Correction to CMYK Specials – Select this to apply ICC correction to CMYK Specials. • Force Relative Colourimetric Media White – Various ICC profiling packages and some older ICC v2 profiles included an Lab value for media (paper) white in the Relative Colourimetric Intent LUT. This has the effect of printing a paper layer when printing with Relative Colourimetric rendering intent. When enabled, this option ignores the Lab value for paper in the Relative LUT, leaving paper white areas unprinted. • CMS Dithering – Disabled by default. Use CMS Dithering for smoother results whenever conversion between 16 bits to 8 bits is required. • Change System Specials – Select a default Special Colour Set for plate matching. This is used by the RIPMonitor and polling service for plate assigning. Colours in this set are automatically assigned in the RIPMonitor. • Unknown Specials – Select a Special Colour Set (optional) to which unknown special/spot colours included in PDF or Postscript jobs can be automatically added. Working Paths Working Paths lists the default location of the paths the Server uses to process jobs. • Raster – Holds all the imaged, rendered and print jobs while they are live in the system. Serendipity Software -‐ Veripress User Manual – Version 5.3.02 110
• Spool – The location where the job is spooled prior to processing. • Temp – After spooling, the job is moved to the temp directory where it is worked on. • Drop – The default location for the DropFolders. The Raster directory holds all jobs while they are in the system and as such, can be very large. If this is moved it needs to be placed on a disk with plenty of space. A Server restart is required if any paths are changed in order for the changes to take effect. Important Note: All existing files in the new working path directory are deleted when the Server is restarted. Ensure the new working path directory has no essential data. A warning message will popup to confirm whether to proceed with the path change. Serendipity Software -‐ Veripress User Manual – Version 5.3.02 111
Page 1 and 2:
User Manual Version 5.3.02
Page 3 and 4:
Media..............................
Page 5 and 6:
Veripress User Manual Copyright
Page 7 and 8:
Installation The installation se
Page 9 and 10:
Mac OS X Installation Administr
Page 11 and 12:
Upgrading to Version 5.3 This
Page 13 and 14:
Mac OS X - Upgrading to Versi
Page 15 and 16:
Saving/Restoring the Veripress D
Page 17 and 18:
Starting the Client Once the S
Page 19 and 20:
RIP Configuration If your Verip
Page 21 and 22:
The Veripress Server The Veripr
Page 23 and 24:
The Veripress Dongle Updater Th
Page 25 and 26:
Menu Options Application • Acc
Page 27 and 28:
Workbench Data Types There are
Page 29 and 30:
Calcheck Chart The Calcheck Cha
Page 31 and 32:
Camera The Camera data type is
Page 33 and 34:
Job Genie Plate separated, sing
Page 35 and 36:
Note: The To Separator and Tru
Page 37 and 38:
Tabs - (5) Display The Display
Page 39 and 40:
ICC Profiles ICC Profiles are
Page 41 and 42:
Collating Collating is a method
Page 43 and 44:
When adding a new printer thro
Page 45 and 46:
Input Screening Input Screening
Page 47 and 48:
Media Effects The attributes he
Page 49 and 50:
Regular Expression The Regular
Page 51 and 52:
Tab 2 - Exact When using the
Page 53 and 54:
File Transfer Priority This spe
Page 55 and 56:
o o o o Group Pages - Group the
Page 57 and 58:
Special Colour Set Veripress us
Page 59 and 60: Note: The 3 swatch charts are
Page 61 and 62: BookMonitor The BookMonitor modu
Page 63 and 64: ClusterStatus The ClusterStatus
Page 65 and 66: QueueManager The QueueManager di
Page 67 and 68: Version 3.0 Rotations Surface
Page 69 and 70: RIPMonitor The RIPMonitor displa
Page 71 and 72: Status Status shows the current
Page 73 and 74: Archives The Archives Applicatio
Page 75 and 76: • Render - Shows the number
Page 77 and 78: • Name - Save the name of t
Page 79 and 80: o Custom - Type in the field
Page 81 and 82: Clicking on a Display name und
Page 83 and 84: Page View (Contextual Menu) The
Page 85 and 86: Jobs The Jobs application is u
Page 87 and 88: Press Agent The Press Agent ap
Page 89 and 90: Click on the Tick/Cross to pop
Page 91 and 92: • Show Excess Ink Weight Area
Page 93 and 94: • Rotation - Control the orie
Page 95 and 96: The page boxes are colour code
Page 97 and 98: Touch Console The Touch Console
Page 99 and 100: • Auto Crop - Remove white s
Page 101 and 102: • Book Order - Select which
Page 103 and 104: • Nest - Submits the jobs fo
Page 105 and 106: Accounts Admin / Secure Mode V
Page 107 and 108: Hosts Panel The Hosts panel al
Page 109: Additional Monitors Specific set
Page 113 and 114: Log File - To view the log f
Page 115 and 116: 8. Print Using - Select Printer
Page 117 and 118: • Click Next. • Additional P
Page 119 and 120: Troubleshooting Clustering Here
Page 121 and 122: Copyright Notices PNG Library C
Page 123 and 124: Code in sys/linux is developed
Page 125 and 126: If distribution of executable o
Page 127 and 128: Copyright The XFree86 Project,
Page 129 and 130: Importing Signatures Dynastrip...
show all

Version 5.3.02 - Serendipity Software

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?