Version 5.3.02 - Serendipity Software

• Centre Offset – The value to offset the centre by. This is dependent upon the gripper position.
• Gripper Size
• Gripper Position
The plate width and height will alter the press Sheet size if the plate size is larger. If the plate size is smaller, the press
Sheet size is not affected. A plate size larger than the sheet size will appear with a red line outline within the signature
preview panel.
Sheet
Enter the dimensions of the press sheet in this panel. The options are:
• Width
• Height
• AutoFit – Changes the press sheet size so the pages fit.
Grid
This panel is where the grid of pages that make up the imposition signature is defined or edited. The options are:
• X and Y Position – This sets the top left position of the selected group or page in respect to the top left of the
press sheet.
• Page Size – Select the size of the single page selected from one of the
pre-­‐set page sizes or choose Custom.
• Page Width – Enter the width of the single page selected. The pre-­‐set
page sizes automatically complete this field.
• Page Height – Enter the height of the single page selected. The pre-­‐set
page sizes automatically complete this field.
• Orientation – Select the orientation of the selected page between
Portrait or Landscape.
• Columns – Enter the number of columns for the signature.
• Rows – Enter the number of rows for the signature.
• Gutter X and Y – Enter the size of the gutter for the signature. If you select a gap first, the value is applied to the
selected gutter only. If you wish to apply a value to All, Even or Odd, you need to select it from the pull down
menu first and then enter the value. Press Enter to apply the value.
• Delete – Deletes the selected pages or groups.
• Duplicate – Duplicates the selected page or group. This is positioned at top left (X=0, Y=0).
• New/Place – Creates a new page or group. Selecting this changes the button to Place. Enter the page attributes
as desired and click Place to position the page or group. If you change your mind, press Esc to cancel.
Pages
• Number – Enter the page number of the selected pages.
• Top Bleed – Enter the amount of top bleed to apply to the selected pages.
• Bottom Bleed – Enter the amount of bottom bleed to apply to the selected pages.
• Left Bleed – Enter the amount of left bleed to apply to the selected pages.
• Right Bleed – Enter the amount of right bleed to apply to the selected pages.
• Page Head – Select the position for the head of the currently selected pages. As you choose, the diagram shows
the change. The page head is indicated by a line and folded corner. Choose between:
o Page Head Up
o Page Head Down
o Page Head Left
o Page Head Right
Serendipity Software -­‐ Veripress User Manual – Version 5.3.02
56