Version 5.3.02 - Serendipity Software

More documents

Recommendations

Info

Densitometer The Densitometer application allows you to measure and display density readings with a supported Spectrophotometer. When measuring a patch, the densities of all four process CMYK colours making up the patch are read. The Last Measured panel in the top half of the application window shows the density and dot percentage values for the dominant process colour of the measured patch, with the values of the other three colours to the right. The values can be recorded and saved to a file if desired. Note: The Densitometer application is a utility allowing you to use a Densitometer or Spectrophotometer that does not have a display to read values. This can be as a one-‐off reading to compare densities, or you may want to read values and export them for plotting on a graph. There is no requirement to use this for the normal operation of Veripress. Densitometer/Measurement/Paper Options • Yule Nielsen Number – Enter the YN number for the paper you are reading (if known). The default is 2.0. • Densitometer – Choose one of the supported instruments from the available list. • Instrument Default Density Standard – Select your desired density standard from the available list. • Activate/Deactivate – Connect or disconnect the chosen device. • Add – Add the measured values to the list. This appears after the Densitometer has successfully connected. To being measuring: 1. Select a Densitometer from the dropdown list and click the Activate button. 2. The status field is shown when the device connects without error. 3. Follow any instructions when prompted – Calibrate, Measure Cyan Solid, etc. Measure Targets In order to read percentage tint values of any plate, you must first read the paper white and the solid density value for that colour. The Measure Targets menu or contextual (right click) menu allows for measuring the solid reference densities for the process colours and the paper white. With these values stored, colour percentages can be calculated and displayed. Measure or update an individual Solid density or Measure All Targets. Colour List This is a list of readings taken if the Add is enabled. Each reading is appended to the list and the values measured are displayed. The columns can be resized or reordered as required by dragging the header to the preferred position. The columns are: • Name – The name of the colour read. Defaults to “Untitled” but can be changed by selecting the name and entering a new one. • Colour – Shows the dominant colour read, i.e., the one with the highest density value. This may not be the colour you perceive it to be, but the contents making up the colour are recorded and the colour is calculated and shown. • Density – The density value for the colour. This is the highest density read from C, M, Y and K. It shows the density of the colour stated in the Colour column. • Cd/Md/Yd/Kd – The C, M, Y and K densities of the colour read. • Dot% – The dot percentage of the colour shown in the Colour column. • C%/M%/Y%/K% – The C, M, Y and K percentage values for the colour measured. If any of the % columns are blank, the reference paper white or solid density for that colour has not been measured. Export You can export the values from the Colour List to a file. The available options are: • All – Saves all entries in the list. • Selected – Save the selected entries in the list only. Selecting either of these options displays a window allowing you to choose the values to be saved. The choices are: Serendipity Software -‐ Veripress User Manual – Version 5.3.02 76
• Name – Save the name of the colour. • Colour Density – The highest density reading regardless of colour. • Cyan/Magenta/Yellow/Black Density – The density reading of the chosen colour. For e.g., if Cyan is selected, the Cyan density for each reading is taken. This is the value displayed in the Cd column of the list. • Colour Percentage – The percentage reading of the highest density read as displayed in the Dot% column. • Cyan/Magenta/Yellow/Black Percentage – The percentage reading of the chosen colour. For e.g., if Cyan is selected, the percentage of Cyan for each reading is taken. This is the value displayed in the C% column of the list. The percentage values must be present for the values to be exported. If they are not, the exported file will show a 1% value in place of the reading. • Order Values – Choose whether to export the file in CMYK or KCMY order. • Separate Values With – Choose to separate the values with either a tab character or a space. • Cancel – Cancels the Export action. • Export – Displays a file chooser allowing you to enter a name and select a location to save the file to. Table 1 – Supported Density Standards Density Standard - Status Instrument A E I T Default DTP41 DTP34 DTP22 DTP20 Spectrolino EyeOne Not all instruments support all density standards. This table is not a complete list. Consult your instrument user guide for more information. Serendipity Software -‐ Veripress User Manual – Version 5.3.02 77
Page 1 and 2:
User Manual Version 5.3.02
Page 3 and 4:
Media..............................
Page 5 and 6:
Veripress User Manual Copyright
Page 7 and 8:
Installation The installation se
Page 9 and 10:
Mac OS X Installation Administr
Page 11 and 12:
Upgrading to Version 5.3 This
Page 13 and 14:
Mac OS X - Upgrading to Versi
Page 15 and 16:
Saving/Restoring the Veripress D
Page 17 and 18:
Starting the Client Once the S
Page 19 and 20:
RIP Configuration If your Verip
Page 21 and 22:
The Veripress Server The Veripr
Page 23 and 24:
The Veripress Dongle Updater Th
Page 25 and 26: Menu Options Application • Acc
Page 27 and 28: Workbench Data Types There are
Page 29 and 30: Calcheck Chart The Calcheck Cha
Page 31 and 32: Camera The Camera data type is
Page 33 and 34: Job Genie Plate separated, sing
Page 35 and 36: Note: The To Separator and Tru
Page 37 and 38: Tabs - (5) Display The Display
Page 39 and 40: ICC Profiles ICC Profiles are
Page 41 and 42: Collating Collating is a method
Page 43 and 44: When adding a new printer thro
Page 45 and 46: Input Screening Input Screening
Page 47 and 48: Media Effects The attributes he
Page 49 and 50: Regular Expression The Regular
Page 51 and 52: Tab 2 - Exact When using the
Page 53 and 54: File Transfer Priority This spe
Page 55 and 56: o o o o Group Pages - Group the
Page 57 and 58: Special Colour Set Veripress us
Page 59 and 60: Note: The 3 swatch charts are
Page 61 and 62: BookMonitor The BookMonitor modu
Page 63 and 64: ClusterStatus The ClusterStatus
Page 65 and 66: QueueManager The QueueManager di
Page 67 and 68: Version 3.0 Rotations Surface
Page 69 and 70: RIPMonitor The RIPMonitor displa
Page 71 and 72: Status Status shows the current
Page 73 and 74: Archives The Archives Applicatio
Page 75: • Render - Shows the number
Page 79 and 80: o Custom - Type in the field
Page 81 and 82: Clicking on a Display name und
Page 83 and 84: Page View (Contextual Menu) The
Page 85 and 86: Jobs The Jobs application is u
Page 87 and 88: Press Agent The Press Agent ap
Page 89 and 90: Click on the Tick/Cross to pop
Page 91 and 92: • Show Excess Ink Weight Area
Page 93 and 94: • Rotation - Control the orie
Page 95 and 96: The page boxes are colour code
Page 97 and 98: Touch Console The Touch Console
Page 99 and 100: • Auto Crop - Remove white s
Page 101 and 102: • Book Order - Select which
Page 103 and 104: • Nest - Submits the jobs fo
Page 105 and 106: Accounts Admin / Secure Mode V
Page 107 and 108: Hosts Panel The Hosts panel al
Page 109 and 110: Additional Monitors Specific set
Page 111 and 112: • Spool - The location where
Page 113 and 114: Log File - To view the log f
Page 115 and 116: 8. Print Using - Select Printer
Page 117 and 118: • Click Next. • Additional P
Page 119 and 120: Troubleshooting Clustering Here
Page 121 and 122: Copyright Notices PNG Library C
Page 123 and 124: Code in sys/linux is developed
Page 125 and 126: If distribution of executable o
Page 127 and 128:
Copyright The XFree86 Project,
Page 129 and 130:
Importing Signatures Dynastrip...
show all

Version 5.3.02 - Serendipity Software

Create successful ePaper yourself

Delete template?

Save as template?