Version 5.3.02 - Serendipity Software
Version 5.3.02 - Serendipity Software
Version 5.3.02 - Serendipity Software
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Click on the Tick/Cross to popup a menu with the following options: <br />
• Calibrate – Begin calibration of the monitor using the current settings and Spectrophotometer assigned in the <br />
Displays application. Once calibrated, the monitor ICC profile is <br />
automatically saved as the operating system default replacing the <br />
previous ICC profile. <br />
Note: When calibrating or calchecking, the Spectrophotometer assigned in the Displays application for either tasks <br />
should be connected and ready for use. If the instrument is different to the assigned one an error will occur, ceasing the <br />
operation. It is recommended to check the appropriate Spectrophotometer has been assigned before using the Calibrate <br />
or Calcheck Monitor functions (see Applications > Displays). <br />
• Calcheck Monitor (Chart Name) – This option will open the Displays application and begin a Calcheck of the <br />
softproofing monitor using the Calcheck Chart assigned to the current Press settings. The chart is named in <br />
brackets. The pass/fail status may change as a result of the check. Detailed results can be viewed in the History <br />
area of the Displays application. <br />
Note on Spot Colours: When performing a monitor calcheck from the SoftProof application, any special/spot colours <br />
included in the currently loaded job are measured and added as extra patches to the end of the Calcheck Chart. <br />
Tools <br />
• Pan – Navigate around the image by clicking and dragging the job around the screen. <br />
• Zoom – Zoom in or out of the job. Clicking the mouse zooms twice the current percentage factor. <br />
SHIFT+Click will zoom out half the percentage factor. Click and drag over an area to zoom it. <br />
• Note – Create, manage and delete notes. <br />
• Measure – Take a measurement on the image. Use the shift key to draw straight lines. <br />
• Crop – Crop an image and resubmit it. <br />
• Guide – Display guide lines on the image to check for alignment. Change the orientation by pressing <br />
SHIFT. ESC will remove the guides. <br />
• Spectro – Take measurements of the job being viewed. A popup window will appear displaying the <br />
Lab/Lch/XYZ/Density values at the point the Spectro cursor is onscreen. <br />
Veripress only – Additionally, the Spectro Tool gives the user the option to choose an instrument which can <br />
be used to measure a hard proof. The measurement taken is compared to the softproof and the deltaE <br />
displayed onscreen. <br />
SoftProof Widgets <br />
There are four (4) sliding widgets available from the left panel of icons in the SoftProof viewing window. <br />
These include: <br />
• Channels <br />
• Publications <br />
• Ink Keys <br />
• Get Info <br />
Channels Widget <br />
The Channels Viewer shows the channels or plates of the job currently being <br />
viewed in SoftProof. Plates can be turned on or off by clicking the relevant coloured <br />
checkbox to the left of the plate name and can be reordered by clicking and <br />
dragging to a new position. The plate colour and associated attributes can be <br />
changed by double-‐clicking a choosing another Special Colour Set from the library, <br />
or edited for that SoftProof instance only. <br />
<strong>Serendipity</strong> <strong>Software</strong> -‐ Veripress User Manual – <strong>Version</strong> <strong>5.3.02</strong> <br />
89