Erasmus ECTS Information Package

More documents

Recommendations

Info

Erasmus ECTS Information Package Faculty of EEEA 0511 Special Electrical Power Equipment ECTS credits: 6 Weekly classes: 2lec+0sem+3labs Assessment: exam Type of exam: written and oral Departments involved: Department of Electrical Power Engineering Faculty of Electrical Engineering, Electronics and Automation Lecturers: Prof. Ivan Jordanov Palov, MEng, PhD, Department of Electrical Power Engineering, tel: 082 888 364, E-mail: ipalov@uni-ruse.bg Assoc. Prof. Dimo Neykov Dimov, MEng, PhD, Department of Electrical Power Engineering, tel: 082 888 659, E-mail: dnd@uni-ruse.bg Assoc. Prof. Kyril Aleksandrov Sirakov, MEng, PhD, Department of Electrical Power Engineering, tel: 082 888 364; E-mail: csirakov@uni-ruse.bg Abstract: The course objective is the acquisition of knowledge about specialized elements from electrical equipment of machines, aggregates and technological lines. The newly-acquired knowledge must enable the students to design contemporary electrical equipment. Course prerequisite is the bachelor degree course. The Special Electrical Power Equipment Course is linked to subjects such as Technical safety systems, Design and production of electrical goods, Electronic transformers in the electrical power systems, and the Final Year project development. Course content: Electrical equipment dynamics. Special features in electrical equipment of cranes and electro-telphers, of elevator’s electrical equipment and explosively dangerous zones. Transforming elements in electrical equipment. Special electrical power equipment of metal cutting machines with numerical programming control. Application of programmed controllers in electric equipment in technological processes. Teaching and assessment: Visual aids are used during the lectures. Lectures build up on students’ knowledge, which is analyzed and contributes for gaining further knowledge. The laboratory exercises are carried out in a cycle with the use of industrial models. Oral exams and short tests (up to 5 minutes) in written form are administered during the classes. Nonstandard tasks in the area of electric equipment are given to the students during the laboratory exercises. Report presentations are required for acceptance of the laboratory exercises. The exam is written and the final mark is defined after an additional oral exam. 0515 Energy Management & Energy Audit ECTS credits: 4 Weekly classes: 2lec+2sem+0labs Assessment: continuous assessment Type of exam: written and oral Departments involved: Department of Electrical Power Engineering Faculty of Electrical Engineering, Electronics and Automation Lecturers: Prof. Kondju Jordanov Andonov, MEng, PhD, DSc, Department of Electrical Power Engineering, tel.: 082 888 749, E-mail: kandonov@uni-ruse.bg Assoc. Prof. Stefan Petrov Stefanov, MEng, PhD, Department of Electrical Power Engineering, tel.: 082 888 616, E-mail: stefanov@uni-ruse.bg Abstract: The course considers: the management structure, normative regulations in structures management and the conducting of energy audits in objects with a view to the realization of students as specialists in the powerengineering sector and others. The output connections are related to the diploma project developing and the further work of students in energy companies, laboratories and units on design, engineering and research. Course content: Power engineering management. Functions and organizational - management structures of institutions in the sector. Normative regulations framework of the power engineering management. Management activities of energy companies. Regulations, rules and guidelines for energy efficiency audits and making of energy-audit reports for objects. Teaching and assessment: Lectures are held at pre-announced schedule by topics. The topics of the seminars are all related to the lectures. With the aid of the supported technology of seminars conducting, the cycle of forming of management skills in the future engineers in the power sector is closed. 217
Erasmus ECTS Information Package Faculty of EEEA 0519 Design and Production Technologies for Electrical Installations ECTS credits: 4 Weekly classes: 2lec+1sem+0labs Assessment: continuous assessment Type of exam: written Departments involved: Department of Electrical Power Engineering Faculty of Electrical Engineering, Electronics and Automation Lecturers: Assoc. Prof. Krasimir Velikov Martev, MEng, PhD, Department of Electrical Power Engineering, tel.: 082 888 749, 082 888 280, E-mail: kmartev@uni-ruse.bg Assoc. Prof. Dimo Neikov Dimov, MEng, PhD, Department of Electrical Power Engineering, tel: 082 888 659, E-mail: dnd@uni-ruse.bg Abstract: In the Design and Production Technologies of Electrical Installations course the students study the regularities in the process of designing and producing separate elements and the item as a whole. The course objective is to acquaint students with the design methodology and production of electrical equipment. Because of the great variety of products and their constructive forms, the technological processes are examined according to their constructional and technological principle. Special attention is paid to the production of the more important systems specific for the electrical industry: magnetic systems, current systems, windings and electrical insulation systems. Course content: Basic concepts and characteristics, main point and tasks, main questions connected with the technological process design. Manufacture of magnetic systems, windings, contact bodies and electrical insulation systems. Teaching and assessment: The Design and Production Technologies of Electrical Installations course includes lectures, laboratory exercises and seminars. At the lectures the students become acquainted with the principles of designing and manufacturing of technical products. Different examples from everyday practice are given at the laboratory exercises. The exam is written. 1435 Reliability and quality of electricity supply ECTS credits: 4 Weekly classes: 2lec+0sem+1labs Assessment: exam Type of exam: written and oral Departments involved: Department of Electrical Power Engineering Faculty of Electrical Engineering, Electronics and Automation Lecturers: Assoc. Prof. Stefan Petrov Stefanov, MEng, PhD, Department of Electrical Power Engineering, tel.: 082 888 616, E-mail: stefanov@uni-ruse.bg Principal Assistant Konstantin Georgiev Koev, MEng, PhD, Department of Electrical Power Engineering, tel.: 082 888 661, E-mail: kkoev@uni-ruse.bg Abstract: The subject includes: reliability characteristics and indices of electric power systems; the methods and models for its assessment of different customers about project and exploitation of the electric power systems, and the power quality effect to the reliability. The students receive theoretical and practical knowledge needed for designing and exploitation of the electric power system and its elements. The entry connections are with Electrical materials, Theoretical electrical engineering, Electrical Networks and Systems and others. The exit connections are with the Diploma thesis and the students’ practice realization. Course content: Electricity supply reliability research objects, methods and models. Electrical power systems reliability characteristics and indices. Methods and models of reliability assessment. Evaluation and optimization reliability features of different power supply systems customers. Analysis the project and exploitation power systems reliability. Power quality effects on the power systems reliability. Teaching and assessment: The tuition is putted into effect with the support of lectures and laboratory exercises. Contemporary technical devices to present information are used for displaying the lecture material. The laboratory exercises are once at an interval of two weeks and are two academic hours long. The current oversight is being realized with examining the students before the particular exercise. The exam is conducted through written composing of two questions the lectures’ material. There is also oral exam on some of the main problems of the subject. 218
Page 2 and 3:
Erasmus ECTS Information Package Fa
Page 4 and 5:
Page 6 and 7:
Page 8 and 9:
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Erasmus ECTS Information Package Ad
Page 18 and 19:
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
Page 166 and 167:
Page 168 and 169: Erasmus ECTS Information Package Fa
Page 268 and 269:
Page 270 and 271:
Page 272 and 273:
Page 274 and 275:
show all

Erasmus ECTS Information Package

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?