RD&D-Programme 2004 - SKB

References
Chapter 1
1-1 Havel R, 2000. FRINK projektrapport. Inkapslingsanläggning placerad vid djupförvaret.
SKB R-00-16, Svensk Kärnbränslehantering AB.
1-2 Havel R, 2000. Jämförelse av alternativa lokaliseringar för inkapslingsanläggningen.
SKB R-00-49, Svensk Kärnbränslehantering AB.
1-3 SKBF/KBS, 1983. Final Storage of spent nuclear fuel – KBS-3. Parts I–IV.
Svensk Kärnbränsleförsörjning AB.
Chapter 3
3-1 SKB, 1999. Deep repository for long-lived low- and intermediate-level waste.
Preliminary safety assessment. SKB TR-99-28, Svensk Kärnbränslehantering AB.
3-2 SKB, 2003. Planning report for the safety assessment SR-Can. SKB TR-03-08,
Svensk Kärnbränslehantering AB.
3-3 SKB, 2004. Interim main report of the safety assessment SR-Can. SKB TR-04-11,
Svensk Kärnbränslehantering AB.
Chapter 4
4-1 Gillin K, 1998. Säkerheten vid drift av inkapslingsanläggningen. SKB R-98-12,
Svensk Kärnbränslehantering AB.
Chapter 5
5-1 SKB, 1998. RD&D-Programme 98. Treatment and final disposal of nuclear waste. Programme
for research, development and demonstration of encapsulation and geological disposal.
Svensk Kärnbränslehantering AB.
5-2 SKB, 2002. Övergripande konstruktionsförutsättningar för djupförvaret i KBS-3-systemet.
SKB R-02-44, Svensk Kärnbränslehantering AB.
5-3 Werme L, 1998. Design premises for canister for spent nuclear fuel. SKB TR-98-08,
Svensk Kärnbränslehantering AB.
5-4 King F, Ahonen L, Taxén C, Vuorinen U, Werme L, 2001. Copper corrosion under expected
conditions in a deep geologic repository. SKB TR-01-23, Svensk Kärnbränslehantering AB.
5-5 Rosborg B, Werme L, 2003. Influence of Surface Defects on Pitting Resistance of Copper Canisters.
Presented at 11 th International Conference on Environmental Degradation of Materials in Nuclear
Power Systems – Water Reactors, August 10–14, 2003 Stevenson, WA, USA.
5-6 King F, 2004. The effect of discontinuities on the corrosion behaviour of copper canisters.
SKB TR-04-05, Svensk Kärnbränslehantering AB.
5-7 Bell K, 1995. Tearing resistance and integrity assessment of electron beam welds in nuclear fuel
canisters. SKB Project Encapsulation PPM 96-3420-13.
5-8 Andersson C-G, 2001. Development of fabrication technology for copper canisters with cast inserts.
Status report in August 2001. SKB TR-02-07, Svensk Kärnbränslehantering AB.
5-9 Andersson C-G, Emilsson G, Eriksson P, Westman M, 2004. Status report, canister fabrication.
SKB TR-04-23, Svensk Kärnbränslehantering AB.
5-10 Ronneteg U, Moberg B, 2003. Inkapslingsteknik. Lägesrapport 2002. Oförstörande provning.
SKB R-03-31, Svensk Kärnbränslehantering AB.
5-11 Ssemakula H, 2004. Manufacturing of heavy rings and large copper canisters by plastic deformation.
Doctoral Thesis, Royal Institute of Technology.
5-12 Lundin M, Gustafsson O, von Brömsen B, Troell E, 2001. Granskning av SKB:s förslag till
inkapslingsteknik. SKI Rapport 01:9, Swedish Nuclear Power Inspectorate.
Chapter 6
6-1 Müller C, Öberg T, 2004. Strategy for verification and demonstration of the sealing processing for
canisters for spent fuel. SKB R-04-56, Svensk Kärnbränslehantering AB.
6-2 Andersson C-G, 1998. Test manufacturing of copper canisters with cast inserts. Assessment report
August 1998. SKB TR-98-09, Svensk Kärnbränslehantering AB.
6-3 Claesson S, Ronneteg U, 2003. Electron beam welding of copper lids. Status report up to
2001-12-31. SKB R-03-25, Svensk Kärnbränslehantering AB.
RD&D-Programme 2004 337