RealFlight G3 Manual - Great Planes Software Support

RETRACT SERVO-
This dialog indicates which servo (if any) controls the retractable landing gear.
To select the servo, click the value box. This will bring forth the drop-down menu.
Mouse click on one of the options in the drop-down menu or use the up/down arrow
keys on the keyboard. If using the up/down arrows, press the Enter button to
finalize your selection. Please note: if using fixed gear, No Servo should be
selected.
RETRACT SERVO REVERSE-
Once you have decided which servo controls the retractable landing gear, this setting
dictates whether to reverse the output of the retract servo.
To make your selection, click the respective value box. Select either Yes or No from
the pull-down menu.
ROTATION ABOUT X (GEAR DOWN) (DEG)-
This value indicates the degree of rotation around the X-axis when the gear is in the
down position.
To adjust the rotational degree about the X-axis when the gear is deployed, click the
existing value in the value box. Next, enter the desired value either directly from the
keyboard or via the mouse wheel. Larger positive values will sweep the gear
towards the front of the fuselage when they deploy.
ROTATION ABOUT X (GEAR UP) (DEG)-
This value indicates the degree of rotation around the X-axis with the gear in the up
position.
140 • Chapter 7. The Aircraft Menu R/C Simulator RealFlight