RealFlight G3 Manual - Great Planes Software Support

Click on the Radio Display to examine the radio channels, their respective values
and the effect that they have on the aircraft.
NAME-
Indicates where the raw input comes from. As an example, examine the Transmitter
CH 1 (Roll) (%) line. This indicates that the horizontal movement of the right stick
controls Channel 1. The item within the parentheses indicates the controlling
channel. You can examine this information to determine if multiple channels are
mapped to the same location.
VALUE-
This numeral indicates the current value of the input received from the named
transmitter channel.
RADIO OUTPUT-
This value represents the output of the radio after it has undergone the software
mixing (if applicable). For example, if you have increased the percent to scale input,
the value here may exceed 100%.
OUTPUT CHANNEL (CHANNEL NUMBER)-
To add an Input Feed to the Output Channel, right click on the Output Channel
number. Select Add Simple Input Feed or Add Complex Input Feed from the
pull-down menu.
To view the current output for a particular channel, click on the respective channel.
This will open a new branch, as shown below:
R/C Simulator RealFlight Chapter 7. The Aircraft Menu • 231