RealFlight G3 Manual - Great Planes Software Support

• Unpowered - utilized for sailplanes and gliders. Not
recommended for helicopters.
RADIO TYPE-
This setting determines which radio connection to use in the simulation. There are
two Radio Type options are available to you: Software Radio and Pass Through.
To change the Radio Type, click on the existing Radio Type and select the desired
radio from the drop-down list. For more information pertaining to the differences
between the Software Radio and Pass Through modes, please refer to the chapter
pertaining to the Controller menu.
VEHICLE GRAPHICAL SCALE (%)-
This value represents the actual visual scale of the model and is used to scale the
model up or down visually. This has no effect on the physics of the simulation.
To modify the Vehicle Graphical Scale, click the existing scale in the value box.
Next, enter the desired values either directly from the keyboard or via the mouse
wheel.
Please note: the Visual Graphics Scale does NOT affect the flight characteristics of
the model. If you increase the size of an aircraft and would like to have it fly like the
larger aircraft, adjust the Physics Dimension Scale to match.
CURRENT GRAPHICAL WIDTH (READ ONLY)–
This value represents the graphical width of your aircraft. This value cannot be
adjusted manually. Instead, it corresponds to graphical changes in the wingspan.
R/C Simulator RealFlight Chapter 7. The Aircraft Menu • 173