RealFlight G3 Manual - Great Planes Software Support

INPUT FOR THIS SERVO-
This option determines which servo controls the respective channel. In our example,
Channel 1 on the receiver controls the right aileron.
To change the input, click on the value (e.g., Receiver Channel 1). Next, select the
desired option from the pull-down menu.
Please note: it is important to pay attention to the assigned channels. Failure to do
so may cause conflicting input. Therefore, the results may not be the original
intention. If, for example, you alter the input value to Receiver Channel 2, each time
the elevator input is given, the right aileron will respond.
To select a servo, click the existing selection in the value box to bring up the pulldown
menu selections. Use either the Up/down arrow keys on the keyboard, or the
mouse to select the desired option. If using the arrow keys, press Enter to finalize
your selection.
R/C Simulator RealFlight Chapter 7. The Aircraft Menu • 221