DI-770 Oscilloscope provides five virtual instruments in one

DI-770 and WINDAQ/Scope Manual
Sample rate:
Bandwidth:
Impedance:
Coupling:
Output amplitude:
Amplitude step:
DC level:
Waveforms:
Symmetry:
Memory:
50 MHz
DC to 2MHz
50 Ohm
DC
-12 Volt .. 12 Volt
0 - ±0.1 V range, 8192 steps
±0.1 - ±0.9 V range, 8192 steps
±0.9 - ±12 V range, 8192 steps
0 - ±12 V in 8192 steps
sine, triangle, square, DC, noise and user defined
1 - 99%, 1% steps
1 - 256 Kwords
Trigger System
System:
Source:
Trigger modes:
Level adjustment:
Hysteresis adjustment:
Resolution:
Pre trigger:
Post trigger:
Digital trigger input level:
digital, 2 levels
CH1, CH2, AND, OR, digital external
rising slope, falling slope, inside window, outside window, peak
0 - 100% of full scale
0 - 100% of full scale
0.025% (12 bits)
0 - 131060 samples (0 - 100%, one sample resolution)
0 - 131060 samples (0 - 100%, one sample resolution)
0 - 3.3 volt (5 volt max)
Power Requirements
Power from USB port:
Power via extension connector:
500 mAmp max (2.5 Watt max)
1500 mAmp max (7.5 Watt max)
Physical
Dimensions:
Weight:
Cord length:
1.0 × 6.7 × 5.2 in. (25 × 170 × 140 mm)
approx. 2 pounds 10 ounces (1190 grams)
1.8 meter (70 inch)
I/O Connectors
Input Channel 1:
BNC
Input Channel 2:
BNC
Output AWG:
BNC
USB:
USB 2.0 and USB 1.1 type A
Extension connector: Sub-D 25 pins female
Specifications
8