10.07.2015 Views

Hughes 9201 BGAN Terminal User's Guide 2.2 - GMPCS Personal ...

Hughes 9201 BGAN Terminal User's Guide 2.2 - GMPCS Personal ...

Hughes 9201 BGAN Terminal User's Guide 2.2 - GMPCS Personal ...

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

PUT THE BATTERY ON CHARGETo charge the battery, connect the AC mains power adapter to the terminal and to an externalpower source. The temperature of the battery must be within 0°C to 45°C for charging to takeplace successfully.USING THE AC MAINS POWER ADAPTERThe AC mains power adapter is for indoor use only. It has an indoor operating temperaturerange of 0ºC to 40ºC and provides an output voltage of 20 VDC.To power the terminal using the AC mains power adapter:1. Remove the power adapter from the terminal box.2. Insert the power adapter output connector to the DC Power Input Jack on the back of theterminal, as shown below:3. Plug the AC Power Cable into a suitable AC mains power outlet, and charge the battery forthree hours. If the AC Power cable does not fit into your power outlet, use the travel adapter. You can operate the Satellite <strong>Terminal</strong> while the battery is charging.NoteYou are now ready to install the <strong>BGAN</strong> LaunchPad Software.<strong>Hughes</strong> <strong>9201</strong> <strong>BGAN</strong> <strong>Terminal</strong> <strong>User's</strong> <strong>Guide</strong> <strong>2.2</strong> 7

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!