Hughes 9201 BGAN Terminal User's Guide 2.2 - GMPCS Personal ...

EXIT, RESET AND RESTART FEATURESEXITING LAUNCHPADYou can exit LaunchPad and leave any active connections open. Refer to Closing a DataConnection or Closing a Connection in Multi-User Mode for details.Exit LaunchPad as follows:1. Click File > Exit BGAN LaunchPad. The Shutdown Confirmation dialog box displays:2. Click Yes to confirm shutdown, or No to cancel.RESETTING THE TERMINALIf you have the required access privileges, you can reset all the configuration settings of theTerminal to the factory default. Note that your current settings are lost during the reset.Note: This will delete all “User” Parameters that have been previously setup (WLAN, DNS, Username and password, etc.)To reset the terminal to factory default:Select the Terminal > Reset to Factory Default option on LaunchPad main menu. The Reset toFactory Default dialog box displays, as shown below:3. Enter the security code in the Security Code text box. The security code is “broadband’(lowercase)4. Click on OK to reset the terminal, or click on Cancel to exit without resetting.RESTARTING THE TERMINALYou may want to restart the terminal if an error occurs.To restart the terminal:1. Select Terminal > Restart Terminal from the LaunchPad main menu. The Restart BGANTerminal dialog box displays, as shown below:72 Hughes 9201 BGAN Terminal User's Guide 2.2