Hughes 9201 BGAN Terminal User's Guide 2.2 - GMPCS Personal ...

3. When you have finished pointing the terminal, you are ready to register with the network. .Note: You can register with the network by pressing the “Audio” button on the terminal for 3-4 seconds. Once the GPS light goes out, the terminal is registered with the network and youcan start to make ISDN calls without the use of LaunchPad.4. or Go to the next section Registering with the Network for registering with LaunchPad.5. When you register with the network, the buzzer turns off automatically.Note: If the audio button is pressed when the unit is not in pointing mode, it will have noeffect.NoteThe audio buzzer will always default to off when the unit powers on. When the unit isIn pointing mode, pressing the Audio button located in the front of the terminalturns the buzzer on. Pressing it again turns the buzzer off. Long pressing (3-4seconds) the Audio button starts registration with the network. Once you exitpointing, the buzzer will turn off. If the Audio button is pressed when the unit is not inpointing mode, it will have no effect.REGISTERING WITH THE NETWORK USING LAUNCHPADWhen you have successfully pointed the antenna, you then need to exit antenna pointing, andregister with the network. If you have an ISDN handset connected to the terminal, you can exitpointing and register by pressing the #1# keys. Otherwise click on the icon Register with networknow on the BGAN LaunchPad pointing window.BGAN LaunchPad contains the following:LAUNCH BARClick on any icon to display the associated tab, where you can perform BGAN LaunchPadfunctions.The launch bar options include:• Data connections − connecting to the Internet to browse Web sites and send and receiveemails, and also using advanced applications such as video and FTP.• Text message options − sending and receiving text messages.• Phone options − Used as a phonebook only for ISDN. Supplementary Services are activatedwith the ISDN handset via a series of button commands. See Supplementary ServicesSection.• Usage information − Not currently supported.• Services information − listing Service Provider support options.• Support information − listing LaunchPad help and Service Provider contact details.18 Hughes 9201 BGAN Terminal User's Guide 2.2