Hughes 9201 BGAN Terminal User's Guide 2.2 - GMPCS Personal ...

More documents

Recommendations

Info

3. When you have finished pointing the terminal, you are ready to register with the network. .Note: You can register with the network by pressing the “Audio” button on the terminal for 3-4 seconds. Once the GPS light goes out, the terminal is registered with the network and youcan start to make ISDN calls without the use of LaunchPad.4. or Go to the next section Registering with the Network for registering with LaunchPad.5. When you register with the network, the buzzer turns off automatically.Note: If the audio button is pressed when the unit is not in pointing mode, it will have noeffect.NoteThe audio buzzer will always default to off when the unit powers on. When the unit isIn pointing mode, pressing the Audio button located in the front of the terminalturns the buzzer on. Pressing it again turns the buzzer off. Long pressing (3-4seconds) the Audio button starts registration with the network. Once you exitpointing, the buzzer will turn off. If the Audio button is pressed when the unit is not inpointing mode, it will have no effect.REGISTERING WITH THE NETWORK USING LAUNCHPADWhen you have successfully pointed the antenna, you then need to exit antenna pointing, andregister with the network. If you have an ISDN handset connected to the terminal, you can exitpointing and register by pressing the #1# keys. Otherwise click on the icon Register with networknow on the BGAN LaunchPad pointing window.BGAN LaunchPad contains the following:LAUNCH BARClick on any icon to display the associated tab, where you can perform BGAN LaunchPadfunctions.The launch bar options include:• Data connections − connecting to the Internet to browse Web sites and send and receiveemails, and also using advanced applications such as video and FTP.• Text message options − sending and receiving text messages.• Phone options − Used as a phonebook only for ISDN. Supplementary Services are activatedwith the ISDN handset via a series of button commands. See Supplementary ServicesSection.• Usage information − Not currently supported.• Services information − listing Service Provider support options.• Support information − listing LaunchPad help and Service Provider contact details.18 Hughes 9201 BGAN Terminal User's Guide 2.2
REGISTRATION STATUS AND COVERAGE MAPThis area displays the registration date and time, location information and other registrationinformation, and shows the expected coverage zone.Note: The map depicts BGAN's expectations of coverage, but does not represent a guaranteeof service. The availability of service at the edge of coverage areas fluctuates depending onvarious conditions.STATUS BARThe Connected to status, terminal Status and Signal strength are all shown on the status bar, asshown below:FIXED/SEMI-FIXED INSTALLATIONThe satellite terminal can be mounted on a pole or flat surface (such as a wall or roof) using theFixed Mount Kit accessory. This kit includes all the installation brackets, mounting hardware, toolsand instructions to complete the installation, except for the screws, bolts, etc. required to mountit to the structure. Proper installation ensures that the terminal is always correctly pointed at thesatellite. The terminal can then be left alone for an extended period of time without having tobe re-pointed or set-up. The Fixed Mount Kit accessory can be re-used to install the terminal indifferent locations.When mounted in a location where access to the terminal may not be straightforward (forexample, mounted high on a wall), you may want the terminal to recover automatically after apower outage. To permit this, the following automatic mode settings are recommended (seethe Automatic Mode section for more details):• Auto “on” mode is enabled• LED off mode is enabled• Antenna pointing bypass is enabledHughes 9201 BGAN Terminal User's Guide 2.2 19
Page 2: Copyright © 2007 Hughes Network Sy
Page 5 and 6: PACEMAKERSThe various brands and mo
Page 7: Size and Weight ...................
Page 11 and 12: INTRODUCTIONABOUT THIS PRODUCTThe H
Page 13 and 14: PACKAGE CONTENTSWhen you unpack the
Page 15 and 16: GETTING STARTEDINTRODUCTION TO GETT
Page 17 and 18: PUT THE BATTERY ON CHARGETo charge
Page 19 and 20: which case the terminal may be able
Page 21 and 22: CONNECTING BY ETHERNETTo connect th
Page 23 and 24: CONNECTING WITH THE NETWORKEstablis
Page 25 and 26: 5. After you have positioned the Te
Page 27: 5. When you have successfully regis
Page 31 and 32: LAUNCHPAD SOFTWARE INSTALLATIONSUPP
Page 33 and 34: 2. Follow the on-screen instruction
Page 35 and 36: • Installation CompleteHughes 920
Page 37 and 38: ESTABLISHING COMMUNICATIONS BETWEEN
Page 39 and 40: INDICATOR LIGHTS (LEDS)The LEDs ind
Page 41 and 42: These LEDs also indicate the signal
Page 43 and 44: The Extended lithium ion battery pa
Page 45 and 46: ISDN COMPATIBLE DEVICESThe terminal
Page 47 and 48: PERSONALIZATIONAfter the PIN check,
Page 49 and 50: In the second phase, the Upgrader l
Page 51 and 52: hexadecimal format. If you have pro
Page 53 and 54: BGAN SERVICESVOICE TELEPHONY SERVIC
Page 55 and 56: SupplementaryServiceDescriptionStri
Page 57 and 58: DATA SERVICESLaunchPad provides a v
Page 59 and 60: OPENING DATA CONNECTIONSData connec
Page 61 and 62: OPENING A DEDICATED STREAMING CONNE
Page 63 and 64: OPENING A VPNTo open a VPN connecti
Page 65 and 66: 9. Click on Apply to save the displ
Page 67 and 68: MANAGING ISDN CONNECTIONSOPENING AN
Page 69 and 70: If a user has a TE device that can
Page 71 and 72: USIM APN MODE VS. MANUAL APN MODETh
Page 73 and 74: Hughes 9201 BGAN Terminal User's Gu
Page 75 and 76: The phonebook is stored on the USIM
Page 77 and 78: From this window you can:• Create
Page 79 and 80:
DELETING A CONTACTTo delete a conta
Page 81 and 82:
TCP PEP SOFTWARETransmission Contro
Page 83 and 84:
2. Click on OK to restart the termi
Page 85 and 86:
CONFIGURING A CONNECTIONThis sectio
Page 87 and 88:
5. Click on Apply to save the displ
Page 89 and 90:
CONFIGURING ROUTING OPTIONSTo confi
Page 91 and 92:
CONFIGURING SUPPORT DETAILSUsing th
Page 93 and 94:
EXPORTING A USER LOGINIf required,
Page 95 and 96:
CHANGING THE FACILITY PASSWORDYou c
Page 97 and 98:
SOFTWARE VERSIONS AND AVAILABILITYY
Page 99 and 100:
To clear a BGAN log file from your
Page 101 and 102:
2. Select the file to email from th
Page 103 and 104:
POWER-ON SELF-TESTSATELLITE TERMINA
Page 105 and 106:
The following screen appears:Click
Page 107 and 108:
The following functions are also av
Page 109 and 110:
Problem Possible Cause Possible Sol
Page 111 and 112:
TECHNOLOGY OVERVIEWGPSThe Global Po
Page 113 and 114:
WLANWireless Local Area Networking
Page 115 and 116:
DECLARATION OF CONFORMITYHughes Net
Page 117 and 118:
affect the data transmission rates.
show all

Hughes 9201 BGAN Terminal User's Guide 2.2 - GMPCS Personal ...

Create successful ePaper yourself

Delete template?

Save as template?