Planning with SIVACON 8 PS - Siemens

More documents

Recommendations

Info

Planning with LDA/LDC4.2 System componentsStructure of the busbar packageAn example a 7-bar system (sectional view) is illustrated below. The positions of theindividual phases and the protective conductor PEN are indicated. You can also see theenclosure profile. Figure 4-2Sectional drawing of a 7-bar systemLD busbar systems are available with aluminium (LDA....) and also copper (LDC....)conductor materials. Due to the conductors’ special surface finishing, trunking units withdifferent conductor materials can be combined. In addition to tinning, aluminium bars arealso coated with a layer of nickel.123Aluminium barNickel layer, tinningMoulded-plastic coating with high heat resistanceLDA busbar systems with aluminium conductors123Copper barTinningMoulded-plastic coating with high heat resistanceLDA busbar systems with copper conductorsPlanning with SIVACON 8 PS108 Planning Manual, 10/2007, A5E01541101-01
Planning with LDA/LDC4.2 System componentsIn order for short-circuit rating to be assured and for the pitch of the bars to be maintained,bar supports are fitted every 200 mm (see diagram):Figure 4-3Bar supports fittedPlanning with SIVACON 8 PSPlanning Manual, 10/2007, A5E01541101-01 109
Page 1:
Planning Manual · 10/2007Planning
Page 4 and 5:
Safety GuidelinesThis manual contai
Page 6 and 7:
Table of contents3.3 Technical data
Page 8 and 9:
Table of contents6 Planning with LR
Page 10 and 11:
Table of contentsPlanning with SIVA
Page 12 and 13:
System overview1.1 Overview of Siem
Page 14 and 15:
System overview1.1 Overview of Siem
Page 16 and 17:
System overview1.2 CD-K systemConne
Page 18 and 19:
System overview1.3 BD01 systemConne
Page 20 and 21:
System overview1.4 Networked busbar
Page 22 and 23:
Planning principles2.2 Busbar trunk
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Planning principles2.3 Rated curren
Page 32 and 33:
Planning principles2.4 System selec
Page 34 and 35:
Planning principles2.4 System selec
Page 36 and 37:
Planning with BD2A/BD2C3.2 System c
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59: Planning with BD2A/BD2C3.2 System c
Page 60 and 61: Planning with BD2A/BD2C3.2 System c
Page 62: Planning with BD2A/BD2C3.3 Technica
Page 65 and 66: Planning with BD2A/BD2C3.3 Technica
Page 67 and 68: Planning with BD2A/BD2C3.4 Conducto
Page 69 and 70: Planning with BD2A/BD2C3.4 Conducto
Page 71 and 72: Planning with BD2A/BD2C3.5 Dimensio
Page 103 and 104: Planning with LDA/LDC 44.1 System d
Page 105 and 106: Planning with LDA/LDC4.2 System com
Page 107: Planning with LDA/LDC4.2 System com
Page 127 and 128: Planning with LDA/LDC4.3 Technical
Page 141 and 142: Planning with LDA/LDC4.5 Dimension
Page 147 and 148: Planning with LXA/LXC 55.1 System d
Page 149 and 150: Planning with LXA/LXC5.2 System com
Page 159 and 160:
Planning with LXA/LXC5.2 System com
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Planning with LXA/LXC5.3 Technical
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Page 177 and 178:
Page 179 and 180:
Page 181 and 182:
Page 183 and 184:
Page 185 and 186:
Page 187 and 188:
Page 189 and 190:
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Page 197 and 198:
Page 199 and 200:
Page 201 and 202:
Planning with LXA/LXC5.4 Dimension
Page 203 and 204:
Page 205 and 206:
Page 207 and 208:
Planning with LRC 66.1 System descr
Page 209 and 210:
Planning with LRC6.2 System compone
Page 211 and 212:
Page 213 and 214:
Page 215 and 216:
Page 217 and 218:
Page 219 and 220:
Page 221 and 222:
Page 223 and 224:
Page 225 and 226:
Planning with LRC6.3 Technical data
Page 227 and 228:
Page 229 and 230:
Page 231 and 232:
Planning with LRC6.4 Dimension draw
Page 233 and 234:
Further information about planning
Page 235 and 236:
Further information about planning7
Page 237 and 238:
Page 239 and 240:
Page 241 and 242:
Page 243 and 244:
Page 245 and 246:
Page 247 and 248:
Page 249 and 250:
Page 251 and 252:
Page 253 and 254:
Page 255 and 256:
Page 257 and 258:
Page 259 and 260:
Page 261 and 262:
Page 263 and 264:
Page 265 and 266:
Page 267 and 268:
Page 269 and 270:
Page 271 and 272:
GlossaryAThe manufacturers of low-v
Page 273 and 274:
GlossaryRated ultimate short-circui
Page 275 and 276:
IndexAAdditional equipment, 59, 126
Page 277 and 278:
IndexSelection of systems, 31Select
Page 280:
Siemens AGAutomation and DrivesLow-
show all

Planning with SIVACON 8 PS - Siemens

Create successful ePaper yourself

Delete template?

Save as template?