Planning with SIVACON 8 PS - Siemens

More documents

Recommendations

Info

Planning with LRC6.2 System components6.2.12 Additional equipmentJoint blockThe joint block is used for the trunking units' electrical and mechanical connections. LRCtrunking units are usually supplied without joint units (junction blocks or monoblocks, as theyare also known). Accordingly, you need to make provision to plan and order joint blocksseparately as appropriate for the number of trunking unit connections.Figure 6-8Joint unitAccessories for busbar connections with joint blocksOnce the electrical link with the joint block has been established, it needs to be cast withepoxy resin. For this purpose, moulding casts, cast resin mix, separators and various toolsare provided as accessories. Casting mould Cast resin mix Tool setFixing brackets for horizontal installationVarious types of fixing bracket are available:● Mounting position: edgewise or flat● Mounting characteristic: run supported or fixed.The standard supporting brackets are:● LR..-BHF type for edgewise mounting● LR..-BHH type for flat mountingPlanning with SIVACON 8 PS222 Planning Manual, 10/2007, A5E01541101-01
Planning with LRC6.2 System componentsFigure 6-9Flat (left) and edgewise (right) mounting positionThe fixed points, as they are called, are created using long run lengths in conjunction withexpansion compensation units.Fixing brackets for vertical installationVarious types of bracket have to be used to install vertical busbar runs:● Spring clamp to carry the weight of the run, type LR..-BV.● Sliding bracket to guide the run in the prescribed position, type LR..-BG.● Fixed points to fix the run to the building structure, type LR..-BF.LR..-BVW (wall mounting)LR..-BFPlanning with SIVACON 8 PSPlanning Manual, 10/2007, A5E01541101-01 223
Page 1:
Planning Manual · 10/2007Planning
Page 4 and 5:
Safety GuidelinesThis manual contai
Page 6 and 7:
Table of contents3.3 Technical data
Page 8 and 9:
Table of contents6 Planning with LR
Page 10 and 11:
Table of contentsPlanning with SIVA
Page 12 and 13:
System overview1.1 Overview of Siem
Page 14 and 15:
System overview1.1 Overview of Siem
Page 16 and 17:
System overview1.2 CD-K systemConne
Page 18 and 19:
System overview1.3 BD01 systemConne
Page 20 and 21:
System overview1.4 Networked busbar
Page 22 and 23:
Planning principles2.2 Busbar trunk
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Planning principles2.3 Rated curren
Page 32 and 33:
Planning principles2.4 System selec
Page 34 and 35:
Planning principles2.4 System selec
Page 36 and 37:
Planning with BD2A/BD2C3.2 System c
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62:
Planning with BD2A/BD2C3.3 Technica
Page 65 and 66:
Planning with BD2A/BD2C3.3 Technica
Page 67 and 68:
Planning with BD2A/BD2C3.4 Conducto
Page 69 and 70:
Planning with BD2A/BD2C3.4 Conducto
Page 71 and 72:
Planning with BD2A/BD2C3.5 Dimensio
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Planning with LDA/LDC 44.1 System d
Page 105 and 106:
Planning with LDA/LDC4.2 System com
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Planning with LDA/LDC4.3 Technical
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Planning with LDA/LDC4.5 Dimension
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Planning with LXA/LXC 55.1 System d
Page 149 and 150:
Planning with LXA/LXC5.2 System com
Page 151 and 152:
Page 153 and 154:
Page 155 and 156:
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Planning with LXA/LXC5.3 Technical
Page 171 and 172: Planning with LXA/LXC5.3 Technical
Page 201 and 202: Planning with LXA/LXC5.4 Dimension
Page 207 and 208: Planning with LRC 66.1 System descr
Page 209 and 210: Planning with LRC6.2 System compone
Page 221: Planning with LRC6.2 System compone
Page 225 and 226: Planning with LRC6.3 Technical data
Page 231 and 232: Planning with LRC6.4 Dimension draw
Page 233 and 234: Further information about planning
Page 235 and 236: Further information about planning7
Page 271 and 272: GlossaryAThe manufacturers of low-v
Page 273 and 274:
GlossaryRated ultimate short-circui
Page 275 and 276:
IndexAAdditional equipment, 59, 126
Page 277 and 278:
IndexSelection of systems, 31Select
Page 280:
Siemens AGAutomation and DrivesLow-
show all

Planning with SIVACON 8 PS - Siemens

Create successful ePaper yourself

Delete template?

Save as template?